Sealey Thin Wall Flat Twin Cable - Black - 30M

The cross-sectional area of each conductor is 2 x 2mm².

The cable has a maximum current rating of 17.5A.

Yes, this cable is suitable for standard automotive 12V and 24V systems, provided the current rating is not exceeded.

The black sheath provides basic protection, but the thin wall insulation underneath requires care to avoid abrasion or pinching.

Use a sharp wire stripper designed for automotive wire to carefully remove the insulation without nicking the copper conductors.

RoHS compliant means the product adheres to directives restricting the use of specific hazardous substances in electrical and electronic equipment.

Yes, you can join pieces using appropriate crimp connectors or soldering, ensuring the connection is secure, insulated, and protected from the elements.

Check all connection points for tightness and corrosion. Ensure the cable's current rating is not exceeded by the connected device. Verify the integrity of the insulation along the cable length for any damage.

While designed to be flexible, extreme cold can make any cable stiffer. Allow the cable to warm to room temperature. Ensure you are not trying to bend it tighter than its intended radius.

If minor nicks are present, you can attempt to repair with high-quality electrical tape or heat shrink tubing, but avoid using the damaged section for critical connections if possible. For significant damage, it is best to replace the affected portion of the cable.