Best current price£9.00from eBay
Shopping.co.uk recommended and popular offers
eBay£9.00Visit shop 159 Faithfull Router Bit TCT Straight Cutter Two Flute FAI RB212 12.7 x 63mm
Visit shop
B&Q£18.08Visit shop B&Q - Router Bit Tct Two Flute 12.7 X 63mm 1/2In Shank Fairb212
Visit shop13 offers from £9.00 - £20.64
View price history by clicking the chart icon.
This Faithfull router bit is designed for professional tradesmen, craftsmen, and serious DIY enthusiasts seeking precision and durability. Its key benefit is the long-lasting, excellent finish achieved on a variety of materials due to its tungsten carbide construction. A potential caveat is that proper handling and normal conditions are required to achieve its advertised lifespan, outlasting HSS cutters significantly.
| Model Part Number | FAIRB212 |
|---|---|
| Brand | Faithfull |
The bit is made from tungsten carbide, a significantly harder and more wear-resistant material than High-Speed Steel (HSS), which allows it to maintain its sharpness and cutting edge for a much longer duration under normal operating conditions.
No, this router bit is specifically designed for use with wood, MDF, plywood, and similar abrasive materials. Using it on metal can damage the bit and pose a safety hazard.
After use, clean the bit with a soft brush or compressed air to remove dust and debris. For resin buildup, use a non-abrasive cleaner sparingly with a cloth, then dry thoroughly. Avoid harsh chemicals.
It's recommended to insert the bit shank into the collet by at least two-thirds of its length, or as recommended by your router's manual, to ensure a secure and stable fit during operation.
The term 'Two Flute' refers to the number of cutting edges (or spirals) on the bit. Two flutes generally offer a good balance between cutting speed and the quality of the finish, suitable for a wide range of woodworking tasks.
The cutting diameter (12.7 mm or 1/2 inch) is the maximum width of the cut the bit can make. The cutting length (63 mm) is the length of the cutting edge along the bit's profile, determining how deep a groove or profile it can create in a single pass.
Ensure the bit is securely fastened in the router collet and that the router speed is appropriate for the material. Check for any resin buildup on the cutting edge and clean if necessary. Verify the bit is not dull.
Check that the bit is fully and securely inserted into the collet. Ensure the router itself is functioning correctly and that the bit is not bent or damaged.
Confirm you are using the bit within its intended material range (wood, MDF, plywood). Ensure you are not forcing the cut; let the bit do the work. Excessive heat can also lead to premature wear; ensure adequate feed rates.
Setup: Ensure the router bit is securely fitted into the router's collet. Verify the shank diameter (1/2 inch) matches your router's collet size. Insert the bit to the appropriate depth for stability and tighten the collet firmly.
Compatibility: This bit is compatible with any router that accepts a 1/2 inch shank. It is designed for use with wood, MDF, plywood, and similar composite materials.
Care: After each use, clean the bit to remove wood dust and resin. A soft brush or compressed air can be used. For stubborn residue, a non-abrasive cleaner may be applied sparingly with a cloth, followed by drying. Store the bit in a protective case to prevent damage to the cutting edges. Avoid using the bit on metal or plastic.
