Trend Grabit Damaged Screw & Bolt Remover Set - 4 Piece

The Trend Grabit set can remove screws from No. 4 to 24 and broken bolts from M4 to M12.

You can use this set on wood, metal, and plastic. It is also suitable for screws made from any alloy, including soft brass.

The set includes four sizes: No.1, No.2, No.3, and No.4.

Select the size that best matches the damaged screw or bolt. Start with the smaller sizes and increase until you find the one that fits snugly. Make sure the extraction end fits securely into the damaged fastener.

Apply penetrating oil to the screw or bolt and allow it to sit for some time before attempting extraction. This will help to loosen the rust and make extraction easier.

Store the Grabit set in the provided case to protect the bits from damage and keep them organized.

Yes, you can use the Grabit set with a power drill. However, use caution and apply steady pressure to avoid damaging the bits or the fastener.

Ensure you're using the correct size Grabit bit for the damaged screw. If the bit is too small, it won't grip; if it's too large, it may not fit. Also, make sure the burnishing end has created a clean surface.

Apply more steady pressure and ensure the tool is straight. The bits are durable but can break with excessive force or if the screw is severely corroded. Consider using penetrating oil to loosen the fastener before extraction.

Apply more downward pressure while turning the extraction end of the bit. Try using a pair of pliers to firmly grasp the bit for added leverage if necessary. Also, ensure the Grabit bit is firmly seated and not slipping.