Leyland Trade Fast Drying Plus Water Based Undercoat - White - 2.5L

Yes, it is suitable for use on bare wood. Ensure the wood is properly prepared by sanding to remove any splinters or imperfections.

While primarily designed for wood and plaster, it can be used on properly prepared metal surfaces. Prime the metal surface first if it is prone to rust.

Generally, one coat is sufficient. However, if the surface is heavily stained or the topcoat is a light color, a second coat may be necessary.

This undercoat is compatible with most water-based and solvent-based topcoats. Always check the topcoat manufacturer's recommendations.

Store in a cool, dry place. Seal the container tightly to prevent drying.

Yes, it is suitable for both interior and exterior use.

Coverage can vary depending on the surface. Generally, expect to get around 10-12 square meters per liter.

Ensure the surface is properly prepared by cleaning, sanding, and removing any loose particles.

Check the environmental conditions. High humidity or low temperatures can extend drying times. Ensure adequate ventilation.

Avoid over application. Use a good quality brush or roller and apply the undercoat evenly. Ensure the undercoat is not too thick.