Silverline SDS Plus Masonry Drill Bit - 5.5 x 160mm

The Silverline SDS Plus Masonry Drill Bit requires an SDS+ compatible rotary or percussion drill.

It is designed for use on concrete and masonry.

Select a drill bit size that matches the diameter of the anchor or fastener you plan to use.

Clean the drill bit after each use with a brush or cloth to remove debris.

The lifespan depends on usage, material, and care. The tungsten carbide tip is designed for long life, but proper use is crucial.

The fluted helix design helps to remove dust and debris from the hole, increasing drilling efficiency.

Drill at the appropriate speed and apply steady, even pressure. Allow the bit to cool if necessary.

Check if the drill is set to the correct percussion mode. Ensure the bit is sharp and not damaged. Clear the hole of debris frequently.

Reduce the drilling speed and apply less pressure. Use a bit with a more appropriate length for the depth of the hole.

Ensure you are using the correct drilling speed. Avoid excessive force. Check for any obstructions in the material.