Best current price£4.78from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£4.78Visit shop Ethernet Network Cable Cat6 Gigabit Rj45 Copper Internet Patch Lead 3M Blue 5055383486144
Visit shop
B&Q£7.37Visit shop B&Q - Ethernet Network Cable Cat6 Gigabit Rj45 Copper Internet Patch Lead 3M Blue
Visit shop3 offers from £4.78 - £7.37
View price history by clicking the chart icon.
This Kenable Cat6 Ethernet cable is designed for users needing reliable, high-speed network connections for PCs, gaming consoles, smart TVs, and other network-enabled devices. Its key benefit is enhanced performance with better noise and crosstalk reduction compared to older Cat5/5e standards, delivering speeds up to 250 MHz. A potential caveat is its 24 AWG gauge, which might be less flexible than thinner cables for tight installations.
| Series | Cat6 |
|---|---|
| Model Part Number | 008614 |
| Brand | kenable |
Cat6 cables offer significantly improved performance with more stringent specifications for crosstalk and system noise, supporting higher frequencies (up to 250 MHz) and generally providing faster, more reliable data transfer.
Yes, Cat6 cables are backward compatible with Cat5e and Cat5 devices and ports. The connection will operate at the speed supported by the slowest component in the chain.
AWG stands for American Wire Gauge. A lower AWG number indicates a thicker wire. 24 AWG is a standard gauge for Ethernet cables, balancing conductivity with a reasonable level of flexibility.
UTP stands for Unshielded Twisted Pair. It means the cable consists of pairs of wires twisted together to reduce electromagnetic interference, but the cable itself is not covered by an additional metallic shield.
Measure the distance between your device and your router/switch, adding a little extra slack to avoid pulling the cable taut. Avoid using excessively long cables if a shorter one will suffice, as very long runs can sometimes introduce signal degradation.
Yes, this Cat6 UTP cable is suitable for use with PoE devices, provided the power budget and requirements of the PoE device are met by the power sourcing equipment.
For this cable's diameter, 5-6mm cable clips are recommended to secure it neatly along walls or surfaces without damaging the cable.
Check that both RJ45 connectors are fully seated in their ports. Try a different Ethernet port on your router/switch and your device. Test with a different Cat6 cable if possible to rule out a faulty cable. Ensure network adapter settings on your PC are configured for automatic IP addressing.
Inspect the cable for any visible damage, kinks, or sharp bends. Ensure the cable is not routed near sources of strong electromagnetic interference. Try securing the cable to prevent movement and strain on the connectors.
Verify the cable is securely plugged into both the device and the network switch/router. Restart both the device and the network equipment. Confirm the network port on the device is enabled in its settings.
Setup: Simply plug one RJ45 connector into your device's network port (e.g., computer, router, switch) and the other into the corresponding network port on your router or switch. Ensure the connectors click securely into place.
Compatibility: This Cat6 cable is backward compatible with Cat5 and Cat5e ports and devices. It uses standard RJ45 connectors, making it compatible with virtually all modern networking equipment that features Ethernet ports.
Care:
