Setup, Compatibility & Care Instructions
Setup:
- Measure the height and width of the space behind your radiator.
- Cut the radiator foil to the required dimensions using standard kitchen scissors.
- Make small slits in the foil where necessary to accommodate radiator wall brackets.
- Clean the wall surface behind the radiator to ensure good adhesion.
- Attach the super-strength double-sided sticky pads to the back of the foil or directly to the wall.
- Carefully slide the foil into place behind the radiator, ensuring it is flat and securely attached.
Compatibility:
This radiator foil is generally compatible with most standard wall-mounted radiators. It is designed to be installed between the radiator and the wall. Ensure there is adequate space behind the radiator for the 4mm thick foil. It is not suitable for freestanding radiators or those with complex back designs that prevent a flat installation.
Care:
The foil is designed for minimal care. At the end of the heating season, it can be carefully removed, folded, and stored. To re-install in the following season, use fresh sticky pads. Wipe with a dry or slightly damp cloth if any dust accumulates, but avoid harsh cleaning agents.