Blue Circle Slablayer Plus Grey Slablayer - 20Kg Bag

Coverage depends on the depth of the bedding layer and the size of the paving slabs. Refer to the product packaging for specific coverage details.

The setting time can vary depending on weather conditions. Generally, allow at least 24-48 hours for the Slablayer to fully set before applying any load.

Blue Circle Slablayer Plus Grey is compatible with most concrete and natural stone paving slabs. It's recommended to test on a small area first to ensure compatibility.

Store the unused product in a dry place, off the ground, and sealed to prevent moisture absorption.

You will need a mixing container, a trowel or shovel, a spirit level, and a measuring jug for water.

It is not recommended to use Slablayer in freezing temperatures. Allow the slabs to set in temperatures above freezing.

Dispose of the empty bag according to local waste disposal regulations.

This product is suitable for patios and pathways, however, for driveways a thicker, more heavy-duty material might be required depending on expected vehicle load and usage.

Ensure the sub-base is properly prepared and the Slablayer is applied evenly. Use a spirit level during installation to level the slabs.

Check the expiration date of the product. Ensure the mix ratio of water to Slablayer is correct, and the area is not too cold or wet during the setting process.

Add small amounts of water, mixing thoroughly, to achieve the correct consistency.