Dulux Trade White Wood Primer & Undercoat - White

The product covers approximately 13 m² per litre, but this may vary depending on the surface.

It typically dries in 2-4 hours, depending on temperature and humidity.

Yes, it is suitable for both interior and exterior use.

It is recommended to sand the surface to ensure it is smooth and clean, especially for previously painted surfaces.

For new or bare surfaces, apply two coats. For previously painted surfaces, one coat is usually sufficient.

It is compatible with most water-based and solvent-based topcoats.

Clean brushes, rollers, and other equipment with water immediately after use.

Ensure the surface is clean, dry, and properly prepared. Sand the surface and apply a second coat of primer if necessary.

Ensure adequate ventilation and check the temperature and humidity. Drying time may vary depending on environmental conditions.

Stir the primer thoroughly before use. Apply an even coat, avoiding over-brushing or over-rolling.

Ensure the surface is properly prepared and free of any loose paint. Lightly sand the surface and reapply the primer.