Tile Leveling System - Fleetise
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Fleetise Tile Leveling System is designed for DIY enthusiasts and professional tilers seeking to achieve perfectly flat tile installations with less effort. Its key benefit is ensuring a seamless, level surface for floors, walls, or ceilings by preventing tile movement during mortar setting. A potential consideration is the 2mm spacer width, which may not suit all tiling projects. The system includes 300 tile spacers (clips) and 100 reusable wedges, featuring an updated design for easier clip removal and built-in 2mm spacers.
All features
| Brand | Fleetise |
|---|
Extended Product Information
FAQs
How many tiles can 300 clips and 100 wedges level?
This depends on your tile size and layout. Typically, this set is sufficient for a small to medium-sized area, covering multiple tiles simultaneously. You'll need approximately 4 clips and 2 wedges per tile for standard layouts.
Can I use these for wall tiles as well as floor tiles?
Yes, the system is designed for use on both floors, walls, and ceilings.
What is the warranty on this product?
The Fleetise Tile Leveling System comes with a 12-month return policy and lifetime support, with options for money back or item replacement.
Are the wedges single-use?
No, the wedges are designed to be reusable for multiple tiling projects.
What is the minimum tile thickness I can use?
The system is applicable for tiles with a thickness ranging from 6mm to 15mm.
Do I need separate spacers if I use this system?
The white clips have built-in 2mm spacers, so you typically do not need separate spacers if a 2mm grout line is desired.
Troubleshooting
Clips are difficult to remove after mortar sets.
Ensure the mortar is fully cured. A gentle tap with a rubber mallet or the heel of your shoe on the clip stem should break it free. Avoid excessive force that could damage the tile.
Tiles are not leveling evenly.
Check that clips are inserted correctly under both tiles and that wedges are fully seated. Ensure the floor or wall surface is relatively even before starting.
Grout lines are inconsistent.
The system inherently creates a 2mm grout line. If a different size is desired, separate spacers must be used in conjunction with the leveling system or a different system should be considered.
Pros and Cons
Pros
- Achieves a perfectly flat and level tile surface.
- Updated design simplifies clip removal.
- Built-in spacers eliminate the need for separate spacer tools.
- Reusable components offer long-term value.
- Reduces installation time and effort.
Cons
- Fixed 2mm spacer width may not be suitable for all tile designs.
- Requires purchasing additional clips if the 300-piece set is insufficient.
- Wedging mechanism might require some practice for optimal use.
Setup, Compatibility & Care
Setup:
- Insert the white clips under the edges of the tiles to be leveled.
- Place a tile adjacent to the first.
- Slide a reusable wedge into the opening of the clip, pulling the tiles together until they are level.
- Once the mortar has set, remove the excess clip material (usually by kicking or tapping). The wedge can be reused.
Compatibility:
- Suitable for tile thicknesses between 6mm and 15mm.
- The built-in spacer size is 2mm (0.08 inches).
- Compatible with most types of tiles including ceramic, porcelain, and stone.
Care:
- Clean clips and wedges after each use to ensure proper function.
- Store in a dry place away from direct sunlight.