Sandtex 10 Year Multi Surface Satin Paint - White

The paint is touch dry in 1-2 hours. Recoat time is typically 4 hours, but this may vary depending on weather conditions.

This paint is specifically formulated for exterior use and may not be suitable for interior applications. Always check the product specifications.

Coverage rates vary depending on the surface and application method. Typically, you can expect to cover approximately 12 square meters per litre, but it's recommended to check the product label for the most accurate information.

Two coats are generally recommended for optimal protection and appearance. On very porous surfaces, a third coat may be needed.

It is best to apply the paint in temperatures between 10°C and 25°C. Avoid painting in extreme cold or heat.

Store the paint in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the lid is sealed tightly to prevent drying.

This paint has a soft, low-sheen satin finish.

The product comes with a 1-year guarantee.

Ensure the surface is clean and properly prepared. Lightly sand glossy surfaces to improve adhesion. Allow sufficient drying time between coats.

Ensure the surface is properly prepared. Apply thin, even coats and avoid over-application. Check for extreme temperature changes after application.

Ensure thorough mixing before application. Apply an even number of coats across the entire surface.