Hoover Appliance - Grey/Red HL4

The ANTI-TWIST™ brushroll is designed to automatically prevent hair from tangling. While it handles most hair, very long or dense hair might still require occasional manual clearing. Regularly check and clean the brushroll area as part of your routine maintenance.

The hOn App provides access to additional content such as maintenance guides, troubleshooting tips, and usage advice specific to your Hoover vacuum. It helps you get the most out of your appliance.

It is recommended to wash the E11 filter monthly, or more frequently if you vacuum in particularly dusty environments. Always ensure the filter is completely dry before putting it back into the vacuum cleaner.

No, this Hoover HL410HM/1 001 is designed for dry cleaning only. Do not use it to pick up liquids or in wet conditions.

The 'PUSH & LIFT' button allows you to easily detach the main wand and handle assembly from the floorhead, converting the upright vacuum into a portable handheld unit for cleaning above-floor surfaces like furniture, stairs, and car interiors.

There is a suction control button located on the handle. Use the MAX setting for hard floors or short pile carpets and the MIN setting for deep pile carpets and rugs.

The Hoover Turbo Power HL4 comes with a 3-year warranty, subject to registration within 30 days of purchase on the specified Hoover website.

Check if the dust container is full and empty it. Clean or replace the washable E11 filter. Ensure there are no blockages in the hose, wand, or floorhead.

Ensure the vacuum is powered on and that the correct mode (CARPET) is selected. Check for any obstructions preventing the brushroll from turning freely. If hair has bypassed the ANTI-TWIST™ system, carefully remove it.

Ensure your vacuum is registered on the hOn App. Check your Wi-Fi connection and ensure Bluetooth is enabled on your device. Restart both the app and your vacuum.

Verify that the power cord is securely plugged into a working outlet. Check the power switch on the vacuum. If the issue persists, contact customer support.