UGREEN NASync DH4300 Plus 4 Bay Network Attached Storage Enclosure - Synology DH4300

The NASync DH4300 Plus supports up to 120TB of total storage capacity across its four bays, depending on the drive sizes you install.

Yes, the UGREEN NASync DH4300 Plus is a diskless enclosure. You will need to purchase and install your own 2.5" or 3.5" SATA hard drives or SSDs.

Yes, the NAS offers professional data security features including AES encryption to protect your data at rest.

The UGREEN NASync DH4300 Plus comes with a 2-year warranty.

Yes, with proper network configuration and security settings, you can set up remote access to your NAS through its mobile app or web interface.

It supports JBOD, Basic, RAID 0, RAID 1, RAID 5, RAID 6, and RAID 10 configurations, allowing you to choose the best balance of performance, capacity, and redundancy for your needs.

RAID configuration is done through the NAS's web-based management interface during or after the initial setup process. You will select your desired RAID level and assign the installed drives.

Ensure the power adapter is securely connected to both the NAS and a working power outlet. Check if the power button is fully pressed.

Verify the Ethernet cable is properly connected to both the NAS and your router/switch. Check that the NAS is assigned an IP address and is on the same network subnet as your computer. Restart your router and the NAS.

Ensure you are connected via a 2.5GbE capable network. Check your network cables and router settings. Close unnecessary applications running on the NAS or your computer. Ensure the drives installed are performing optimally.

Ensure the photo folder is correctly indexed. Check if there are enough system resources available. Restart the relevant photo management service via the NAS interface.