Best current price£5.32from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.32Visit shop Kenable Through Coupler Faceplate Cat6a Shielded Ftp 1 Port Rj45 Socket Network Uk Plate
Visit shop
B&Q£6.15Visit shop B&Q - Through Coupler Faceplate Cat6A Shielded Ftp 1 Port Rj45 Socket Network Uk Plate
Visit shop3 offers from £5.32 - £6.15
View price history by clicking the chart icon.
This Kenable Cat6A Shielded 1 Port RJ45 Faceplate is designed for users who need a clean, professional, and permanent solution for terminating Ethernet connections. It offers tool-less installation by allowing pre-terminated RJ45 cables to connect directly to the front and rear, simplifying network setups. A key benefit is the neat finish it provides, avoiding messy cable runs. However, users should be aware that the depth requirement for the module and connected cables necessitates adequate space behind the mounting surface.
| Model Part Number | 10841 |
|---|---|
| Brand | kenable |
Cat6A (Category 6 Augmented) refers to a standard for Ethernet cabling that supports higher bandwidth (500 MHz) and data rates (10 Gbit/s) over longer distances compared to older categories. 'Shielded' means the cable and connectors have a protective layer to reduce electromagnetic interference (EMI), ensuring more reliable performance in noisy environments.
No, this faceplate is designed for tool-less installation. You simply connect pre-terminated RJ45 Ethernet cables to the front and rear ports of the module.
The total depth from the faceplate to the end of the module with a connected cable is approximately 30mm. It is recommended to have adequate clearance behind the mounting surface, potentially requiring an extension back box for installations in cavity walls.
Yes, you can connect Cat5e, Cat6, or Cat6A cables to this faceplate. However, to achieve the maximum supported speeds of Cat6A (10 Gbit/s), you must use Cat6A rated cables on both ends.
Single inserts, like this one, provide one RJ45 port. Double inserts provide two RJ45 ports on a single faceplate, allowing for two separate network connections.
Clean the surface with a soft, dry cloth. If necessary, use a slightly damp cloth, but avoid using harsh chemicals or abrasive cleaners that could damage the finish.
Please refer to the retailer or manufacturer's specific warranty information. Typically, network accessories have a limited warranty against manufacturing defects.
Verify that both front and rear RJ45 cables are fully seated and securely connected. Check that the cables are not damaged and are correctly wired for the intended standard (e.g., Cat6A). Test cables individually if possible.
Ensure the faceplate module and cables are rated for the required speed (Cat6A for 10Gbps). Check for potential EMI if using shielded components in an unshielded environment, or vice versa. Inspect the connections for any signs of damage or poor contact. Ensure connected cables are not kinked or excessively bent.
Confirm the mounting location is suitable and that any necessary back box or support structure is properly installed. Ensure the faceplate is aligned correctly before securing it.
Utilize a right-angled RJ45 cable on the rear connection or ensure sufficient clearance is provided by using an extension back box or by modifying the mounting space.
Setup:
Compatibility:
Care:
