Best current price£19.77from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£19.77Visit shop 85268Mc 3/8 In. Double Flute Laminate Flush Trimming Router Bit 000346351811
Visit shop2 offers from £19.77 - £24.46
View price history by clicking the chart icon.
The Bosch 3/8-inch Double Flute Laminate Flush Trimming Router Bit is an essential tool for professional woodworkers and cabinetry hobbyists who require precise, clean trimming on laminate or thin wood veneers. Its primary benefit is the ability to achieve a perfect, flush finish with minimal cleanup; however, users should be aware that because it is a specialized flush-trim bit, it is not intended for general-purpose profiling or deep-groove routing.
| Model Part Number | 85268MC |
|---|---|
| Brand | Bosch |
Yes, it can trim thin hardwood veneers, but it is primarily designed for laminate materials.
Yes, but it is good practice to check that the bearing spins smoothly before every use.
Due to the 3/8-inch diameter, it is recommended to run this at moderate-to-high speeds found on standard trim routers.
Yes, the bearing is a standard size and can be replaced if it becomes worn or seized.
No, this is a flush-trim bit designed for edge work, not for cutting grooves or dados.
Reduce your feed rate and ensure the guide bearing is rotating freely. Clean any built-up resin off the cutting edges.
Check that the router base is sitting completely flat against the reference surface and ensure the guide bearing is firmly seated against the substrate.
Check that the bit is securely tightened in the collet and that the router speed is set appropriately for the bit diameter.
To set up the bit, ensure your router is unplugged, then insert the shank firmly into the collet, leaving about 1/8 inch of clearance from the bottom to allow for heat expansion. Always verify that the guide bearing rotates freely before engaging the power.
Compatibility: This bit features a standard shank size compatible with most handheld trim routers and laminate trimmers.
Care: To maintain the longevity of your bit, store it in a protective case to prevent edge chipping. Clean resin buildup from the bit using a dedicated blade cleaner after every heavy project, and periodically check the guide bearing to ensure it is not seized or packed with sawdust.
