Bosch Router Bit Set - 1/4" Shank - 12 Pieces

All bits in this set have a 1/4" shank diameter.

These bits are suitable for use on both softwoods and hardwoods. For very dense hardwoods, multiple shallow passes may be recommended.

This set includes a total of 12 router bits.

Core box bits are designed for creating concave or rounded-bottom grooves, often used in decorative work, sign making, or for routing out channels.

No, these router bits are specifically designed for woodworking applications and should not be used on metal.

Store the bits in the included plastic case to protect the cutting edges and keep them organized. Ensure they are clean and dry before storing.

It means the shape and angle of the cutting edges are designed to reduce resistance, improve chip clearance, and result in a smoother, cleaner cut with less effort and less risk of burning the material.

Ensure the bit shank is fully and securely seated in the collet. Check if the collet or shank is damaged or dirty. Verify the bit is not bent.

Reduce the feed rate (how fast you push the router through the material). Ensure the router speed is appropriate for the bit size and material. Check if the bit is dull or damaged. Make multiple shallow passes instead of one deep pass.

Verify the bit is sharp. Ensure you are routing with the correct grain direction where applicable. Clean any resin buildup from the cutting edges.

Check your feed rate; you may be moving too slowly. Ensure adequate depth of cut per pass. Clear any dust or debris from the cut area as you work.