Best current price£19.41from Amazon
Shopping.co.uk recommended and popular offers
Amazon£19.41Visit shop TP-Link POE2412G 24V 12W PoE Injector, Gigabit Ethernet PoE Injector, Passive PoE Adapter, Power & Data Transmission over Single Cable, Plug and Play, Compatible with Omada Access Points/CPE Devices
Visit shop3 offers from £19.41 - £21.24
View price history by clicking the chart icon.
The TP-Link TL-POE2412G is an essential solution for network administrators and home users needing to power 24V passive PoE-enabled devices, such as Omada access points or outdoor CPE units, via a single Ethernet cable. This adapter simplifies installations by combining data transmission and power delivery, though it is specifically designed for 24V passive PoE hardware and will not work with standard 802.3af/at active PoE devices. It is a reliable, plug-and-play device that supports full Gigabit speeds for high-performance network environments.
| Model Part Number | POE2412G |
|---|---|
| Brand | TP-Link |
No. This adapter provides 24V passive PoE, which is different from the 48V standard active PoE (802.3af/at). It will not power standard PoE cameras.
The maximum recommended operating distance for data and power is 100 meters (328 feet).
No, it is a hardware-based, plug-and-play device that requires no software or configuration.
Yes, it is commonly used to power outdoor CPEs, but the adapter itself should be kept in a dry, indoor environment.
You should use high-quality Cat5, Cat5e, or Cat6 cables to ensure optimal data transfer and power delivery.
The TL-POE2412G provides an output power of up to 12W.
Verify that the device requires 24V passive PoE, as this adapter is not compatible with standard active PoE (802.3af/at) devices.
Ensure you are using high-quality Cat5e or Cat6 cables, as lower-grade cables may limit speed or cause packet loss.
Check that the power cord is securely plugged into both the wall outlet and the adapter, and test the wall outlet with another appliance.
To install, connect your network switch or router to the 'LAN' port on the adapter using a standard Ethernet cable. Then, connect your PoE-compatible device to the 'POE' port. Plug the adapter into a standard AC wall outlet using the included power cord. The 'Power' LED indicator will illuminate once the device is active. Always ensure the total cable run does not exceed 100 meters, as signal degradation or power loss may occur. Keep the unit in a well-ventilated area within the operating temperature range of 0 to 40°C. Periodically check that cable connections are secure and free of dust or debris for optimal conductivity.
