Tulip Artisan Tie-Dye Kit - ARTSN

The Tulip Artisan Tie-Dye Kit works best on natural fabrics like cotton, rayon, and linen.

Allow the dyed fabric to cure for at least 6-8 hours, or longer for more intense colors. 24 hours is recommended for best results.

Rinse the fabric under cold water until the water runs clear, and wash it separately with cold water and a mild detergent for the first few washes.

This kit is designed for use on natural fibers; results may vary when used on synthetic fabrics.

Follow local regulations for dye disposal. Generally, small quantities can be diluted and poured down the drain with plenty of water.

Yes, the MaxVibrant Fiber Reactive Dyes are designed to be permanent and machine washable.

You can purchase additional MaxVibrant Fiber Reactive Dyes separately.

Yes, but be sure to prepare each item separately and tie them individually. Ensure you have enough dye and soda ash solution for all items.

Ensure you're using enough dye and allowing sufficient curing time. Check the fabric's compatibility with the dye and ensure that the soda ash solution was used.

Rinse the fabric thoroughly until the water runs clear before washing. Wash the item separately with cold water and a mild detergent.

Make sure the fabric is evenly wet with the soda ash solution before tying and dyeing. Ensure that the dye is applied uniformly to all areas.