Bartoline All Purpose Ready Mixed Filler - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Bartoline All Purpose Ready Mixed Filler is designed for professionals seeking a reliable, easy-to-use filler for a variety of interior and exterior repairs. Its slump-resistant formula adheres well to plaster, plasterboard, brick, wood, and stone, allowing for clean application up to 10mm deep. While convenient, its maximum fill depth and need for surface protection outdoors are key considerations.
All features
| Colour | White |
|---|---|
| Model Part Number | 1876 |
| Brand | Bartoline |
Extended Product Information
FAQs
Can I use this filler for deep holes?
Yes, but you must apply it in layers no more than 10mm deep, allowing each layer to set before applying the next.
How long does it take to dry?
Drying time varies depending on depth, temperature, and humidity, but it should be sanded when fully set.
Is this filler suitable for bathrooms or kitchens?
Yes, it can be used in these areas. For prolonged contact with moisture, ensure it is properly sealed with a suitable paint or varnish once cured.
Can I put screws into the filler once it's set?
Yes, the filler is designed to accommodate wall plugs, nails, and screws when fully set.
Do I need to prime the filler before painting?
While it is designed not to flash or grin, priming is always recommended for the best, most uniform paint finish, especially on larger repairs.
What surfaces can I use this filler on?
It is suitable for plaster, plasterboard, brick, wood, and stone.
How should I store the unused filler?
Store in a cool, dry place in its original, tightly sealed container. Protect from frost.
Troubleshooting
Filler is too stiff or dry
Stir gently to achieve a smooth consistency. If severely dried, it may not be usable.
Filler is sagging or slumping
Ensure you are not applying thicker than the maximum 10mm depth per layer. Allow previous layers to set fully before applying new ones.
Filler shrinks significantly after drying
This can happen with deep fills. Apply in multiple thin layers (max 10mm each), allowing each to set before the next.
Sanding is difficult or leaving dust
Ensure the filler is fully dry before sanding. Use medium-grit sandpaper followed by fine-grit for a smooth finish.
Painted finish shows uneven patches (flashing/grinning)
Ensure the filler is completely dry and has been sanded smoothly. Overcoat with a suitable primer before applying the topcoat for best results.
Pros and Cons
Pros
- Convenient ready-mixed formulation saves preparation time.
- Excellent adhesion to multiple common surfaces.
- Smooth sanding properties result in a professional finish.
- Suitable for both indoor and outdoor repairs.
- Can securely hold fixings like nails and screws.
Cons
- Maximum fill depth of 10mm per layer.
- Requires protection from rain and moisture when used outdoors until set.
- May require multiple layers for deeper repairs.
- Needs to be filled slightly proud and then sanded.
- Outdoor repairs need further protection from weathering for longevity.
Setup, Compatibility & Care
Preparation:
- Ensure the surface to be filled is clean, dry, and free from dust.
- For hairline cracks, slightly enlarge them to ensure the filler penetrates effectively.
- If filling nail or screw holes in metal, touch them with an oil-based paint first to prevent rust from appearing through the filler later.
Application:
- Stir the filler gently if necessary to achieve an even, smooth consistency.
- Apply the filler manually using a filling knife or trowel.
- Press the filler firmly into the cavity, ensuring it fills the area completely.
- Do not apply more than 10mm depth in a single layer. For deeper areas, apply in multiple layers, allowing each layer to set before applying the next.
- Fill the area slightly proud (higher than the surrounding surface) to allow for sanding.
Finishing:
- Allow the filler to set completely.
- Once fully set, sand the filled area down to a fine, smooth finish.
- The surface is now ready for overcoating with paint or varnish.
Outdoor Use:
- Protect the filled area from rain and moisture until it has fully set.
- For long-term durability outdoors, protect the cured filler from excessive weathering by applying a suitable exterior paint or varnish.
Compatibility:
Suitable for use on plaster, plasterboard, brick, wood, and stone. Always test on an inconspicuous area if unsure about surface compatibility.