Best current price£70.03from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£70.03Visit shop Schneider Electric Merten Argus Motion Switch (Complete) - Cct56p001
Visit shop1 offer from £70.03
View price history by clicking the chart icon.
The Schneider Electric Merten ARGUS Motion Switch (CCT56P001) is designed for indoor spaces requiring automated lighting control, such as small offices or hallways with heavy foot traffic. Its key benefit is reliable motion detection that keeps lights on when needed and turns them off automatically to save energy, though its optimal performance is best within a specific mounting height and range.
| Model Part Number | CCT56P001 |
|---|---|
| Brand | Schneider Electric |
The optimal mounting height for the Merten ARGUS motion detector is 3 meters to achieve its specified detection range.
It can switch a maximum power of 1000W for incandescent and halogen lamps, and handles various VA ratings for transformer-based lighting.
No, the device has an IP20 protection class and is designed exclusively for dry indoor environments.
The switch-off delay is adjustable from approximately 5 seconds to 8 minutes. Consult the product manual for specific adjustment instructions for your model.
At a 3-meter installation height, the detection range radius is a maximum of 4 meters.
While the primary ratings are for incandescent and halogen lamps, compatibility with LED lights depends on their power consumption (VA rating) and whether they are dimmable or use electronic drivers. Consult the manual for specific guidance or test with an appropriate LED load.
The detector operates on a mains voltage of 220-240 V AC, 50 Hz.
Check the mains power connection. Verify that the ambient light setting is not preventing activation (adjust lux setting if needed). Ensure the detection range is not obstructed.
Check the switch-off delay setting; it may be set too long. Ensure there isn't continuous motion within the detection zone. Verify wiring and power supply.
Adjust the switch-off delay setting to a longer duration. Ensure consistent motion is being detected; sensitivity might need adjustment if applicable to the model.
Verify the 230V AC power supply. Check all wiring connections to ensure they are secure. If the issue persists, the unit may require replacement.
Setup:
This motion detector is designed for surface mounting and requires connection to a 230V AC, 50Hz mains power supply. It is compatible with standard electrical wiring. The sensor unit fits into 63 mm wide ceiling openings, and it includes a power box with a 35 cm cable for connections. Ensure the device is mounted at the optimal height of 3 meters for best performance.
Compatibility:
It supports a maximum switching power of 1000W for incandescent and halogen lamps, and various VA ratings for electronic or iron core transformers. It is compatible with AC 230V systems.
Care:
The device is halogen-free. For cleaning, use a dry or slightly damp cloth. Avoid abrasive cleaners or solvents. Ensure power is disconnected before cleaning. Its IP20 rating means it should only be installed in dry indoor environments.
