Rustins Beeswax Polish - 125ml

For general furniture, apply every 3-6 months. For high-use items like tables or handrails, reapplication every 1-3 months may be beneficial.

It is best used on bare or previously waxed/polished wood. Avoid using it on surfaces with a modern lacquer, varnish, or paint finish, as it may not adhere correctly or could affect the finish.

Apply a small amount to a soft, lint-free cloth and rub gently into the wood following the grain. Allow it to dry for a few minutes, then buff to a shine with a clean cloth.

It provides a level of protection against minor spills and moisture, but it is not a complete waterproofing solution. Wipe up spills promptly.

Store in its original container with the lid tightly closed in a cool, dry place away from direct sunlight and heat sources.

This polish is primarily designed for interior wooden surfaces. For outdoor furniture, specialized exterior wood treatments are generally recommended.

Ensure the polish is applied thinly and evenly. Buff thoroughly with a clean, dry cloth to remove excess and achieve a uniform sheen. Multiple thin coats are better than one thick coat.

This might indicate insufficient buffing. Buff the surface vigorously with a clean, soft cloth until the desired shine is achieved. Ensure no excess product was left on the surface.

This can happen if too much polish was applied or if it was not buffed sufficiently. Allow more drying time and buff again with a clean cloth. For stubborn tackiness, a very fine steel wool (0000 grade) used lightly with the grain might help, followed by re-buffing.