Brennenstuhl Circuit Breaker - RCD Plug Adaptor

RCD stands for Residual Current Device. It's a safety device that quickly cuts off the electricity supply if it detects an imbalance in the electrical circuit, protecting against electric shock.

The RCD Plug Adaptor constantly monitors the electrical current. If it detects a leakage current, which can happen if there's a fault, it instantly cuts off the power.

First, switch off and unplug the appliance. Then, check the appliance for damage or faults. If the appliance is fine, you can reset the RCD (if applicable). If it trips again, the appliance may have a fault.

You can use it with appliances that use a standard UK plug and do not exceed a current of 13A.

Refer to the product’s instructions for specific guidance. In general, unplug the adapter, open the fuse compartment (usually accessible by a small slot), remove the old fuse, and insert a new 13A fuse.

The Brennenstuhl RCD Plug Adaptor comes with a 2-year guarantee.

Yes, it is suitable for outdoor use, but it should be protected from direct exposure to rain or extreme weather conditions.

Check the mains socket to ensure it is working correctly. Inspect the fuse within the adapter and replace it if necessary. If the RCD has tripped, press the reset button (if applicable) and try again. Ensure the connected appliance is switched on.

This could indicate a fault with the connected appliance. Disconnect the appliance and test the adaptor with a different device. If the adaptor continues to trip, it may be faulty and need replacing. If the appliance trips other RCDs, it has a fault and requires repair.