HOMCOM Artificial Christmas Tree - 5ft

With its hinge construction, the physical assembly of the sections takes only a few minutes. However, the most time-consuming part is 'fluffing' the branches to achieve a full look, which typically takes 20-30 minutes, depending on your meticulousness.

This tree is designed for indoor use. While it might tolerate brief outdoor periods in calm weather, prolonged exposure to harsh elements like wind, rain, and snow could damage the materials and void any guarantee.

The key to a full tree is diligent fluffing. Starting from the bottom, gently pull and spread each individual branch and tip away from the main stem, varying their angles. Work your way up the tree, making sure to fill any visible gaps.

Yes, the integral injection-molded branches are designed to be sturdy. However, extremely heavy ornaments should be distributed evenly or placed on stronger, main branches closer to the pole. Use wire hooks for better stability if needed.

Remove all decorations, gently collapse the branches towards the pole, and disassemble the tree sections. Store them in the original box or a dedicated tree storage bag in a cool, dry place. Avoid compressing the branches excessively to maintain their shape.

No, this HOMCOM Artificial Christmas Tree is not pre-lit. You will need to add your own string lights to achieve the desired illumination.

The tree has an overall dimension of 110cm (?110cm x 150Hcm), so its widest point is approximately 110cm (43.3 inches).

This is almost always due to insufficient 'fluffing'. Take your time to meticulously spread out each individual branch and tip, bending them slightly in different directions to fill gaps and create density. Start from the inner branches closest to the pole and work your way outwards and upwards. This step is key to achieving a full, lifelike appearance.

Ensure the steel base is fully unfolded and all four legs are evenly extended and flat on the floor. Verify that the bottom tree section is securely inserted into the base and that any locking screws on the base are tightened. Make sure the tree is on a level surface.

After unpacking, allow the tree sections to sit for a while, letting the branches relax. Then, meticulously fluff each branch as described in the 'Setup Instructions'. For stubborn creases, you can gently manipulate the wire within the branches to reshape them. Proper storage in a suitable bag or box will help prevent this in the future.