AVDEL Rivets - Silver - PR4

Avex Rivets Alu S/F 4.0 x 15mm 5/32" x 9/16" PR4 Pack of 500. Features: • Aluminium. • 4.0 x 14.0...

Best current price£17.65from eBay

All Offers

19 offers from £17.65 - £349.18

View price history by clicking the chart icon.

eBay200 x POP® AVDEL Avex Rivets Alu - Steel Large Flange 4.8 x 10.9 mm 3/16 x 3/8
Free delivery in 1–3 days
£17.65
Visit shop
B&QB&Q - Avex Rivets Alu S/f 3.2 X 10mm 1/8" X 3/8" Pr1 Pack Of 500 Pop Avdel
Free delivery in 1–3 days
£28.00
Visit shop

Product Information

Full details

This guide is for DIY enthusiasts and professionals needing reliable fastening solutions for general maintenance. The AVDEL PR4 Avex Rivets provide a secure aluminum join, but their specific size (4.0 x 15mm) means they are best suited for particular applications rather than universal use. This product is part of an extensive premium range of hand-held tools designed to assist with general maintenance.

All features

ColourSilver
Model Part NumberPR4
BrandAVDEL

Extended Product Information

FAQs

What type of tool is needed to install these rivets?

You will need a compatible rivet gun that is designed to set 4.0mm diameter rivets.

What materials can these rivets be used with?

These aluminum rivets are best suited for joining materials like aluminum, thin gauge steel, plastics, and composites.

What is the hole size required for these rivets?

A pre-drilled hole size of approximately 4.1mm to 4.3mm is recommended for these 4.0mm rivets.

Are these rivets suitable for structural applications?

These rivets are generally intended for general maintenance and non-structural applications. For high-stress or structural joints, consult specific engineering guidelines or use heavy-duty fasteners.

How many rivets are in a pack?

Each pack contains 500 AVDEL PR4 Avex Rivets.

Can these rivets be used outdoors?

Yes, aluminum rivets offer good corrosion resistance and are suitable for many outdoor applications, but extreme or prolonged exposure to harsh conditions might require additional protective measures.

What does 'S/F' mean in the product description?

'S/F' typically stands for 'Single Flange', referring to the type of head on the rivet.

Troubleshooting

Rivet not setting properly

Ensure the rivet gun is compatible with 4.0mm rivets and is functioning correctly. Check that the hole size is appropriate for the rivet. Verify the rivet is fully seated before activating the gun.

Rivet mandrel not breaking cleanly

This may indicate an issue with the rivet gun's jaws or the rivet itself. Clean the rivet gun jaws. If the problem persists, try a rivet from a different part of the pack or a different brand.

Poor joint strength

Confirm that the materials being joined are within the recommended thickness range for these rivets. Ensure the correct hole size was used and that the rivet was set with sufficient force.

Corrosion observed on rivets

While aluminum offers good corrosion resistance, prolonged exposure to harsh environments can still cause degradation. Ensure rivets are stored in a dry place and consider protective coatings if used in highly corrosive conditions.

Pros and Cons

Pros

  • Lightweight and corrosion-resistant due to aluminum material.
  • Designed for secure fastening in specific applications.
  • Comes in a practical pack of 500 units.
  • Part of a broad tool range for diverse project needs.

Cons

  • Limited application range due to specific dimensions.
  • Requires a compatible rivet gun for installation.
  • Aluminum may not be suitable for extremely high-stress applications.
  • Pack quantity might be too large or too small for some users.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure you have a compatible rivet gun tool that can accommodate 4.0mm rivets.
  2. Select the appropriate drill bit size to create a hole slightly larger than the rivet mandrel, but snug for the rivet body.
  3. Drill the required holes through the materials you intend to join.
  4. Insert the AVDEL PR4 rivet into the designated hole.
  5. Place the nose of the rivet gun onto the rivet mandrel.
  6. Squeeze the trigger of the rivet gun to pull the mandrel, expanding the rivet body and creating a secure fastening.
  7. Release the trigger and remove the rivet gun; the mandrel will break off.

Compatibility:

  • Rivet Gun: Compatible with standard hand-operated or pneumatic rivet guns designed for 4.0mm rivets.
  • Materials: Best suited for joining aluminum, steel (thin gauge), plastics, and composite materials.
  • Hole Size: Requires a pre-drilled hole of approximately 4.1mm to 4.3mm.

Care:

  • Store rivets in a dry environment to prevent premature corrosion, despite their aluminum composition.
  • Keep the packaging intact to avoid contamination or loss of rivets.
  • Clean rivet guns regularly according to their manufacturer's instructions to ensure optimal performance.

Price History

DatePrice
Visit shop