Setup, Compatibility & Care
Installation
- Measure and mark the center point on your drawer or door where the knob will be placed.
- Drill a single hole using a drill bit size appropriate for your mounting hardware (usually 4-5mm).
- Insert the screw from the back of the door into the knob.
- Tighten with a screwdriver until secure; avoid over-tightening to prevent damage to the door surface.
Compatibility
This knob is compatible with most standard cabinet thicknesses (18mm-22mm). If your cabinet faces are unusually thick, you may need to source a longer M4 bolt from your local hardware store.
Care Instructions
To maintain the dark bronze finish, wipe periodically with a soft, dry cloth. Avoid using abrasive sponges or harsh chemical cleaners, as these can strip the protective finish or cause discoloration. If the knob becomes loose over time, simply tighten the mounting screw from the rear of the cabinet.