Scolmore Click Mode LED Dimmer Switch - 1 Gang 2 Way - White Urea
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to understand and effectively use the Scolmore Click Mode LED Dimmer Switch. It's ideal for those seeking precise control over their LED lighting, offering smooth, flicker-free dimming. However, it requires a minimum 25mm back box depth for installation.
All features
| Colour | White |
|---|---|
| Model Part Number | CMA161 |
| Brand | Click Scolmore |
Extended Product Information
FAQs
What type of lights is this dimmer compatible with?
This dimmer switch is designed for use with LED lights.
What is the warranty period?
The dimmer switch comes with a 20-year warranty.
What are the dimensions of the front plate?
The front plate dimensions are 86 x 86 mm.
What is the maximum load this dimmer can handle?
The dimmer can handle loads from 5 to 100 watts at 250V AC.
What back box depth is required for installation?
A minimum back box depth of 25 mm is required.
How do I clean the dimmer switch?
Clean the switch with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
Is this dimmer switch suitable for outdoor use?
No, this dimmer switch has IP20 protection and is not suitable for outdoor use or areas with high moisture or dust.
Troubleshooting
Lights not dimming.
Check the wiring connections to ensure they are secure and correctly connected. Verify that the LED bulbs are compatible with the dimmer.
Flickering lights.
Ensure the LED bulbs are dimmable and compatible with trailing edge dimmers. Reduce the load if the total wattage is too low.
Dimmer switch not working.
Check the circuit breaker and ensure the power supply is on. Verify that the switch is correctly wired and making proper contact.
Pros and Cons
Pros
- Smooth and flicker-free dimming, improving user experience.
- Long-lasting with a 20-year warranty, offering peace of mind.
- Anti-microbial properties enhance safety and hygiene.
- Easy to install with brass screw terminals.
- Durable materials ensure product longevity.
Cons
- Requires a minimum 25 mm back box depth, potentially limiting compatibility in some installations.
- Only suitable for LED lights.
- IP20 protection, not suitable for areas with high moisture or dust.
- Limited to 100W maximum load.
Setup, Compatibility & Care
Setup:
- Ensure the power is turned off at the circuit breaker before installation.
- Prepare the wiring in the back box, ensuring it meets the required minimum depth of 25mm.
- Connect the wires to the brass screw terminals, following the wiring diagram.
- Secure the switch into the back box.
- Attach the front plate.
- Restore power and test the dimmer.
Compatibility:
This dimmer switch is specifically designed for LED lights. It supports loads from 5 to 100 watts at 250V AC. Ensure your LED lights fall within these specifications.
Care:
Clean the switch with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.