Sealey Tube Bender - AK5056

This Sealey Tube Bender (AK5056) is primarily designed for bending copper pipes. It is supplied with guide bars specifically for 15mm and 22mm copper pipes.

The bender allows for precise bends up to 180 degrees, which is a full half-circle.

Yes, the AK5056 model is supplied with two aluminium guide bars for 15mm and 22mm pipes.

The Sealey Tube Bender AK5056 comes with a lifetime guarantee, reflecting Sealey's commitment to quality and durability.

Regularly clean the bender after use with a dry cloth. Periodically apply a light lubricant to steel parts and moving mechanisms to prevent rust and ensure smooth operation. Store in a dry place.

This bender is optimized for copper pipes. Using it on other materials like aluminum or steel may not yield good results and could potentially damage the tool or the pipe.

Ensure the correct size guide bar is used for the pipe diameter. Check that the pipe is correctly seated in the bender head and that the bend is initiated smoothly without sudden force. For softer copper, a slower, more controlled approach is best.

Clean the bender head and moving parts. Apply a light lubricant to the pivot points and slide areas. Ensure no debris is obstructing the mechanism. Check that the correct size guide bar is fitted and not binding the pipe.

Ensure the pipe is aligned correctly at the start of the bend. Mark the desired bend point clearly on the pipe. Use the degree markings on the bender head as a guide, but practice on scrap pieces to achieve desired accuracy.