Best current price£10.99from eBay
Shopping.co.uk recommended and popular offers
eBay£10.99Visit shop 1x Bartoline PP4759 Direct To Rust Black Radiator Enamel 400mL Spray Paint
Visit shop4 offers from £10.99 - £12.99
View price history by clicking the chart icon.
Bartoline Direct to Rust Radiator Enamel Paint is the ideal solution for homeowners and DIY enthusiasts looking to refurbish tired, rusted, or discolored radiators without extensive surface preparation. By combining a primer, undercoat, and topcoat into one high-performance aerosol formula, it offers a durable, heat-resistant finish that protects against future corrosion and chipping. While it delivers excellent coverage on metal surfaces, users should note that it requires a well-ventilated space during application due to the aerosol spray nature of the product.
| Colour | Black |
|---|---|
| Model Part Number | PP4759 |
| Brand | Bartoline |
No, the direct-to-rust formula is designed to bond to existing surfaces. Only remove loose, flaking paint or heavy corrosion.
No, the surface must be completely cold during application and for at least 24 hours afterward to allow for proper curing.
For best results, apply 2-3 thin, even coats, allowing 15-20 minutes of drying time between each.
Yes, it is highly heat-resistant and perfectly suited for towel rails and heat-exposed metal fixtures.
Wait at least 24 hours after your final coat to ensure the paint has fully hardened.
Use a standard degreaser or a mild detergent solution, then ensure the radiator is wiped down and completely dry.
You are likely holding the can too close or applying the coat too heavily. Use thin, even coats from 15-25cm away.
Ensure the can is shaken for at least two minutes. If the nozzle is clogged, wipe it with a solvent-dampened cloth.
The radiator was likely not cold enough during application, or there was residual grease/moisture on the surface. Ensure the surface is perfectly clean and cold before recoating.
To ensure the best results, turn off the radiator and ensure it is completely cold before starting. Use masking tape to protect surrounding walls and flooring, as aerosol overspray can travel.
