Best current price£9.56from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£9.56Visit shop Gembird Tg-G1.5-01 4.5W/Mk 1.5G Heat Sink Combinations (, 50Mm, 80Mm, 15Mm, 1.5G, -50-240C) Grey 8716309083126
Visit shop1 offer from £9.56
View price history by clicking the chart icon.
The Gembird TG-G1.5-01 thermal compound is designed for PC enthusiasts and builders needing reliable thermal transfer between CPUs, chipsets, or processors and their heatsinks. Its key benefit is ensuring optimal system performance and longevity through efficient heat dissipation. A potential caveat is its electrical conductivity, requiring careful application to avoid short circuits. This 1.5g grey compound offers excellent thermal impedance, stability, and comes in a practical syringe for easy application.
| Colour | Grey |
|---|---|
| Model Part Number | TG-G1.5-01 |
| Brand | GEMBIRD |
Thermal compound fills microscopic gaps between a heat-generating component (like a CPU) and its heatsink, improving heat transfer and preventing overheating.
A small, pea-sized amount in the center of the CPU is usually sufficient. The pressure from mounting the heatsink will spread it evenly.
Yes, it is non-capacitive and electrically conductive. While conductivity requires careful application to avoid short circuits, the compound itself is designed not to damage components.
It is generally recommended to reapply thermal paste every 1 to 3 years, or sooner if you notice a significant increase in component temperatures.
This is the thermal conductivity rating, indicating how well the material transfers heat. A higher number signifies better heat transfer efficiency.
Yes, this thermal compound is suitable for GPUs and other heat-generating components that require a thermal interface material.
The compound can operate effectively in a wide temperature range, from -50°C to 240°C.
Ensure the heatsink is properly mounted with even pressure. Re-clean both surfaces and reapply a small amount of paste, ensuring not too much or too little was used. Verify the heatsink fan is functioning correctly.
The viscosity (76 CPS) is within normal operating parameters. If it seems difficult to spread manually, ensure the surfaces are clean. For application, the pressure from the heatsink mount is designed to spread it.
If you suspect the electrically conductive paste has touched unintended components, immediately power off the system. Carefully clean the affected areas with isopropyl alcohol and a lint-free cloth before powering on again. Ensure paste application was contained to the CPU IHS only.
Setup:
Compatibility:
Care:
