Rycote InVision USM-VB Studio Kit - Grey

The Lyre suspension system uses no elasticated parts, meaning it will never sag, wear out, or require rethreading, providing consistent and reliable microphone isolation over time.

This kit is optimized for larger, heavier condenser microphones (55mm-68mm diameter, up to 900g). Smaller USB microphones may not fit securely or be held effectively.

Yes, the pop filter is designed to lock tightly onto the USM's outer support ring, allowing it to be easily attached, detached, or repositioned as needed.

Clean the mount and pop filter with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents.

It is designed for microphones between 55mm and 68mm in diameter and weighing up to 900g, such as the Blue Kiwi, CAD E350, and SE Electronics Z2200.

No, the kit includes the shock mount and pop filter system. A separate microphone stand is required.

Ensure the shock mount's clamping mechanism is fully tightened around the microphone. Verify the microphone's diameter falls within the 55mm-68mm range specified for the kit.

Tighten the locking mechanism on the pop filter arm and ensure the pop filter itself is securely attached to the mount's support ring.

Confirm the shock mount is properly secured to the microphone stand and that the stand itself is stable. Ensure the microphone is centered within the suspension.

Adjust the position and angle of the pop filter arm and the filter itself to find an optimal spot that blocks plosives without interfering with sound capture.