Best current price£13.76from eBay
Shopping.co.uk recommended and popular offers
eBay£13.76Visit shop Lapp Single Core Cable 4510923 H05V-K 1X1 DBU/WH Blue Approximately 50M
Visit shop7 offers from £13.76 - £67.31
View price history by clicking the chart icon.
This guide is for electricians, installers, and DIY enthusiasts working with low-voltage electrical installations. The Lapp H05V-K 0.5mm² wire offers flexibility and reliable insulation for various applications, though its 70°C temperature limit requires consideration in high-heat environments. It features a class 5 flexible conductor, PVC insulation, and adheres to CPR Euro fire class eca standards, ensuring safety and ease of use in residential and commercial wiring projects.
| Model Part Number | 4510921 |
|---|---|
| Brand | LAPP |
'H05' indicates a harmonized cable with a nominal voltage of 300/500V. 'V' denotes PVC insulation, and 'K' signifies a flexible conductor according to European standards.
Yes, as its nominal voltage is 300/500V, it is suitable for 230V applications, provided the current and temperature ratings are not exceeded and it complies with local electrical codes.
The maximum current capacity depends on the installation method, ambient temperature, and specific application. For a 0.5mm² wire, it is typically suited for lower current loads, consult relevant electrical standards (e.g., IEC or local codes) for precise current ratings under various conditions.
The PVC insulation offers some protection, but this wire is primarily intended for indoor installation. It is not rated for direct sunlight exposure or harsh weather conditions unless further protected within appropriate conduit or enclosures.
CPR Euro fire class eca means the cable meets specific European standards for reaction to fire, indicating a basic level of fire performance. It does not guarantee zero flame spread or smoke emission but provides a standardized safety measure.
No, the wire has a maximum processing and operating temperature of 70°C. For higher temperatures, wires with different insulation materials (e.g., silicone or FEP) would be required.
Class 5 conductors are made of very fine strands, making the wire extremely flexible. This allows for easier pulling through conduits, bending around corners, and fitting into tight spaces without compromising the wire's integrity.
This wire is designed for flexibility. Ensure you are not encountering an obstruction or a sharp bend radius. Re-evaluate the installation path for smoother routing.
Ensure the terminal or connector is appropriate for fine-stranded wire and is properly tightened. Use ferrules if recommended for the specific terminal type to consolidate strands.
Immediately discontinue use and replace the damaged section of wire. Ensure tools used for stripping or cutting are sharp and appropriate for fine-stranded wire.
Verify that the current load does not exceed the wire's capacity for its cross-section and operating temperature. Check for loose connections, which can cause increased resistance and heat. Ensure adequate ventilation if operating near the 70°C limit.
Setup:
This wire is designed for standard electrical termination methods. Ensure the conductor is stripped carefully to avoid nicking the flexible strands. Use appropriate crimp or screw terminals designed for fine-stranded conductors to ensure a secure connection.
Compatibility:
The Lapp H05V-K 0.5mm² wire is compatible with most standard electrical connectors, terminals, and conduit systems designed for 0.5mm² wires. It should be used within its rated voltage (500V) and temperature (70°C) limits. Ensure compatibility with local electrical codes and regulations before installation.
Care:
To maintain performance and safety:
