Forgefix Wing Nut & Washer - M10

M10 refers to the metric thread size. It indicates the nominal diameter of the bolt or screw is 10 millimeters.

While robust for hand-tightened applications, for critical structural loads or high-vibration environments, it is recommended to use mechanically tightened nuts like standard hex nuts to ensure maximum security.

The washer distributes the load of the wing nut over a larger surface area, preventing damage to the material being fastened and providing a more stable connection.

The bright zinc plating provides good corrosion resistance for everyday use and moderate environmental exposure. It acts as a barrier and a sacrificial anode to protect the underlying metal.

Yes, provided the application does not require the high torque or security of a mechanically fastened nut. It's ideal for situations where frequent manual adjustments are needed.

No tools are required. The wing nut is designed to be tightened and loosened by hand due to its 'wings'.

Check that you are using an M10 bolt with the correct thread pitch. Ensure there are no obstructions or damaged threads on either the bolt or the nut. Try cleaning the threads of both components.

This is normal for a hand-tightened fitting. If the nut itself is loose on the bolt, ensure it is tightened sufficiently by hand. For more secure applications, consider using a standard hex nut.

Wipe the surface clean with a dry cloth. While the zinc plating offers protection, prolonged exposure to harsh conditions can still cause surface discoloration. Ensure the product is stored in a dry place when not in use.