Best current price£41.99from eBay
Shopping.co.uk recommended and popular offers
eBay£41.99Visit shop Varilight JQDP303W 3 Gang LED Dimmer Switch White 120W - V-Pro
Visit shop
B&Q£57.27Visit shop B&Q - Dimmer 3G 2W Push 180W 3-Gang 2-Way Push-On/off Rotary Led Dimmer 3 X 15-180W (Max 20 Leds) (Twin Plate)
Visit shop8 offers from £41.99 - £81.10
View price history by clicking the chart icon.
This Varilight Dimmer - White is designed for homeowners looking to control lighting levels with precision. Its key benefit is the ability to dim multiple LED circuits independently using a user-friendly rotary control, while a potential caveat is its specific wattage and LED limitations. This 3-gang, 2-way dimmer features push-on/off functionality and a twin plate design, ideal for managing up to three separate lighting zones.
| Colour | White |
|---|---|
| Brand | Varilight |
The dimmer supports a maximum of 20 dimmable LED bulbs per gang.
Yes, provided the total wattage of the incandescent bulbs does not exceed the maximum of 180W per gang. However, it is optimized for LED compatibility.
Yes, the dimmer can be used in a 1-way circuit, but it also offers the flexibility of 2-way switching if your wiring supports it.
Turn off the power at the mains. Use a soft, dry cloth. For tougher marks, a slightly damp cloth can be used, followed by immediate drying. Avoid chemical cleaners.
A 2-way switch means you can control the same light or lights from two different locations, such as at the top and bottom of a staircase.
Please refer to the product packaging or Varilight's official website for the most up-to-date warranty information, as it can vary.
Check that the circuit breaker is on and that the dimmer is correctly wired. Ensure the total load is within the specified limits.
Verify that the LED bulbs are dimmable and compatible with this dimmer. Check the total number of LEDs and the total wattage per gang; it should not exceed 20 LEDs or the maximum wattage.
Some warmth is normal, especially under high load. If it becomes excessively hot, check the total load and ensure adequate ventilation. Consult an electrician if concerned.
Ensure the push mechanism is not obstructed and that the wiring is secure. Test the switch functionality after confirming power is supplied.
Setup: This dimmer requires installation by a qualified electrician to ensure safety and compliance with electrical regulations. Ensure the power is switched off at the mains before attempting any installation.
Compatibility: This dimmer is designed for use with mains voltage LED lamps and compatible 2-way switching circuits. It has a maximum load of 180W per gang, with a maximum of 20 LED lamps per gang. Always check the wattage of your LED bulbs to ensure they fall within the specified range. Do not use with incandescent or halogen bulbs unless their total wattage is within the 15-180W range per gang.
Care: To clean, ensure the power is switched off at the mains. Wipe the dimmer plate with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and then dry thoroughly. Avoid using abrasive cleaners or solvents.
