Best current price£40.66from Amazon
Shopping.co.uk recommended and popular offers
Amazon£40.66Visit shop Weather station "Sylt", with outdoor probe, radio, alarm clock, black
Visit shop4 offers from £40.66 - £52.52
View price history by clicking the chart icon.
The Hama Sylt Weather Station is designed for individuals who want a clear, digital overview of their indoor and outdoor environment, including temperature, humidity, time, and a weather forecast. Its key benefit is the automatic time synchronization via DCF radio clock and an easy-to-read, extra-large display. A potential caveat is that reliance on battery power means regular battery replacement is necessary.
| Model Part Number | 222216 |
|---|---|
| Brand | Hama |
Press and hold the 'MODE' button until the time starts flashing. Use the 'UP' and 'DOWN' buttons to adjust hours and minutes, then press 'MODE' again to confirm.
Place the sensor in a shaded, well-ventilated area, protected from direct rain and prolonged sunlight. Mounting it on an exterior wall or under a sheltered eave is recommended. Avoid placing it too close to heat sources.
The main unit requires 2x AA batteries, and the outdoor sensor also requires 2x AA batteries, for a total of 4x AA batteries.
Yes, you can deactivate the DCF radio clock signal. Refer to the unit's manual for the specific button combination, typically involving pressing and holding a specific button while the time display is active.
The indoor unit measures temperature from 0°C to 50°C and humidity from 20% to 95%. The outdoor sensor measures temperature from -20°C to 60°C and humidity from 20% to 95%.
The station displays one of seven forecast symbols based on changes in barometric pressure, suggesting conditions like sunny, cloudy, rainy, or snowy weather. It also shows trend arrows for temperature and humidity.
Ensure the outdoor sensor has fresh batteries and is within the 50m range of the main unit. Try resetting both units by removing and reinserting batteries. Ensure there are no significant physical obstructions between the units.
Verify that the DCF radio clock function is enabled. Ensure the main unit is not placed near sources of interference (e.g., large metal objects, electronic devices). Try manually setting the time zone or deactivating and reactivating the DCF signal.
Check and replace the batteries in the main unit. Ensure the batteries are inserted correctly with proper polarity.
Replace the batteries in the outdoor sensor. Check for any physical damage to the sensor. Ensure it is placed within range of the main unit.
Setup:
Compatibility:
Care:
