Purdy Syntox Angular Paint Brush - 2"

This brush is ideal for all clear finishes, including water-based and solvent-based stains, varnishes, and oils.

Syntox filaments provide similar application benefits to ox-hair but are designed to last up to five times longer and are 20% softer than ox-hair, offering an ultra-smooth finish.

This brush is optimized for clear finishes. While it might be used for very thin paints, it is not recommended for standard latex or oil-based paints, as it may not provide the best results or could be damaged.

For water-based finishes, use warm water. For solvent-based finishes, use mineral spirits or lacquer thinner. Always rinse thoroughly with soap and water, reshape, and air dry.

The angular shape provides greater precision and control, making it excellent for cutting in edges, corners, and detailed trim work.

It means the brush is manufactured with high-quality filaments and construction to minimize the chance of individual bristles breaking off and getting into your finish.

The long, natural wood rattail handle provides enhanced grip and control, allowing for precise maneuvering, especially during detailed or intricate painting tasks.

Ensure the brush is clean and free from dried material. Gently flex the bristles; if shedding persists, the brush may be nearing the end of its usable life for fine finishing or may have been damaged. Inspect for any damage to the ferrule.

Check that the brush is properly loaded with finish. Ensure consistent pressure and direction during application. Clean the brush thoroughly and reapply finish, focusing on a smoother, more uniform stroke.

This indicates dried finish material. Clean the brush immediately with the appropriate solvent or water, depending on the finish used. If the material is fully dried, it may be difficult to fully restore flexibility.