Best current price£58.85from PcNova.co.uk
Shopping.co.uk recommended and popular offers
PcNova.co.uk£58.85Visit shop Zyxel Gs1200-5Hp V2 Managed Gigabit Ethernet (10/100/1000) Power Over
Visit shop3 offers from £58.85 - £84.66
View price history by clicking the chart icon.
The ZyXEL GS1200-5HP v2 is a web-managed PoE+ switch designed for small to medium-sized businesses (SMBs) seeking enhanced network control without complexity. Its key benefit is providing essential management features, robust PoE+ power delivery, and optimized traffic handling at an accessible price point. A potential caveat is its 60W total PoE budget, which may require careful planning for power-intensive deployments. This switch offers true web management, Quality of Service (QoS), VLAN support, IGMP snooping, and Link Aggregation, making it suitable for deploying IP cameras, VoIP phones, and wireless access points.
| Series | GS1200 |
|---|---|
| Model Part Number | GS1200-5HPV2-EU0101F |
| Brand | Zyxel |
The GS1200-5HP v2 has a total Power over Ethernet (PoE) budget of 60 watts, with individual ports supporting up to 30 watts each (IEEE 802.3at).
No, this switch supports Gigabit Ethernet (10/100/1000 Mbps) on its ports. It does not have 10G uplink or port capabilities.
Locate the reset button on the switch (typically a small pinhole). Press and hold the button for approximately 10-15 seconds while the switch is powered on. The switch will reboot with its factory default settings.
No, the GS1200-5HP v2 is designed for desktop or shelf placement and does not support rack mounting.
IGMP Snooping allows the switch to intelligently forward multicast traffic only to ports that have requested it, rather than broadcasting it to all ports. This optimizes network performance, especially for applications like IP TV or video streaming.
IEEE 802.3az EEE automatically detects periods of low network traffic and reduces power consumption by entering a low-power idle state, conserving energy without compromising network performance during active use.
The switch has a MAC address table capacity of 2000 entries.
Verify the power adapter is securely connected to both the switch and a working wall outlet. Check the LED indicators for power status.
Ensure Ethernet cables are properly connected and undamaged. Check link/activity LEDs on the switch and connected devices. Verify IP addressing and network configuration if using advanced features like VLANs.
Confirm the connected device supports PoE/PoE+ and is plugged into a PoE-enabled port. Check the 'Power over Ethernet (PoE) ports quantity' attribute to ensure the port is capable. Verify the Total Power over Ethernet (PoE) budget (60W) is not exceeded across all powered devices. Reboot the device via the web GUI if necessary.
Check for network congestion. Ensure that the switching capacity (10 Gbps) is not being exceeded. Review QoS settings to ensure critical traffic is prioritized. Check for loop detection warnings in the logs and resolve any identified loops.
Ensure your computer is connected to the same network segment as the switch. Confirm the switch has obtained a valid IP address. Try rebooting the switch and your computer. Check firewall settings on your computer.
Setup: The GS1200-5HP v2 features a user-friendly web-based management interface. Connect the switch to your network using standard Ethernet cables. Access the web GUI by finding the switch's IP address (often available via DHCP or a network scanning tool) and entering it into a web browser. Follow the on-screen prompts for initial configuration, including setting a strong administrator password.
Compatibility: This switch is compatible with any standard Ethernet devices. It supports IEEE 802.3ab, 802.3af, 802.3at, 802.3az, 802.3p, 802.3u, 802.3x, and 802.3z networking standards. It also supports Jumbo Frames up to 9000 bytes for efficient large packet transfer.
Care: To ensure optimal performance and longevity:
