Best current price£148.86from eBay
Shopping.co.uk recommended and popular offers
eBay£148.86Visit shop Power-TEC Alumax Special Pull Pins Mg 50pc 92509
Visit shopeBay£150.07Visit shop Power-TEC Alumax Special Pull Pins Mg 50pc 92509
Visit shop4 offers from £148.86 - £160.35
View price history by clicking the chart icon.
This guide is for automotive repair professionals and technicians working with aluminum body panels. The Power-TEC Alumax Special Pull Pins (92509) offer a reusable solution for direct pulling with integrated aluminum pullers, enabling efficient bodywork. A potential limitation is their specific compatibility with certain Power-TEC aluminum welders.
| Model Part Number | 92509 |
|---|---|
| Brand | POWERTEC |
The pull pins are manufactured from AIMg3 Aluminium.
The set includes 50 pieces of special pull pins.
Each pull pin measures 4 mm in width and 40 mm in length.
No, these pull pins are specifically designed for compatibility with Power-TEC aluminum welders part numbers 92508, 92510, 92168, and 92513.
No, these pull pins are designed to be re-usable.
They are designed for use with integrated aluminium pullers for direct pulling on aluminum body panels during automotive repair.
Clean any residue with a degreaser or solvent, and store them in a dry place to maintain their condition and re-usability.
Ensure the aluminum surface is clean and free from paint, grease, or contaminants. Verify that the welding settings on your Power-TEC welder are appropriate for aluminum and the pull pin.
Confirm that the puller being used is compatible with the 4 mm shank of the pull pin. Ensure the puller mechanism is clean and functioning correctly.
Check that you are using a compatible aluminum welder and appropriate settings. If the dent is very severe, consider using multiple pins or a different pulling technique. Inspect the pin for previous damage.
Use a suitable tool to gently pry or break the connection point. Avoid excessive force that could damage the panel. Ensure the weld was not excessively strong.
Setup: To use the Power-TEC Alumax Special Pull Pins, ensure you have a compatible Power-TEC aluminum welder (part numbers 92508, 92510, 92168, or 92513). Follow the welder's instructions for attaching the pull pin to the aluminum surface. Once attached, connect your integrated aluminum puller to the pin.
Compatibility: These pull pins are specifically designed for use with the following Power-TEC aluminum welders: 92508, 92510, 92168, and 92513. They are intended for use on aluminum body panels.
Care: After each use, carefully remove the pull pin from the repaired panel. Clean any residue from the pin using a degreaser or appropriate solvent. Store the pins in a dry place to prevent corrosion and maintain their re-usability. Inspect pins for any signs of damage before each use.
