Design ID Wallpaper - Cream

While the wallpaper is extra washable, it's not specifically designed for high-moisture environments like bathrooms where steam can be prevalent. For best results, use it in living areas, bedrooms, or hallways.

Your wall should be clean, dry, smooth, and sound. Remove any old wallpaper, fill holes, sand smooth, and ensure the surface is not dusty or greasy. Priming is often recommended.

It is generally not recommended to wallpaper over existing wallpaper, especially if it is textured or vinyl. Remove all old wallpaper first to ensure proper adhesion and a smooth finish.

Use a high-quality wallpaper adhesive suitable for heavyweight vinyl wallpapers. Always follow the adhesive manufacturer's instructions for application and drying times.

For stubborn marks, use a slightly damp cloth with a mild soap solution. Gently wipe the affected area and rinse with a clean damp cloth. Avoid harsh scrubbing or abrasive cleaners.

The product information indicates dimensions of 1005 x 53 x 7, likely representing length x width in cm, with a thickness of 7mm. For precise roll coverage, check the product packaging or manufacturer's specifications.

This wallpaper is designed with a finished texture and color. It is not intended to be painted over.

Gently lift the affected edge and re-smooth towards the bubble to push out air. If the adhesive has dried, use a sharp craft knife to carefully prick the bubble and smooth it down.

Ensure the wall surface was properly prepared, clean, and dry. Reapply wallpaper paste evenly and ensure adequate paste coverage, especially at edges and seams.

Ensure you are using the 'peelable' feature correctly. If it is old or has been painted over, it may require steaming or a wallpaper remover solution to soften the adhesive before peeling.

Adjust the panel position carefully before the paste sets. Ensure you are using a plumb line for the first panel to guarantee vertical alignment.