Wolf® Reinforced Suction & Discharge Drain Pump Hose - 1 1/4" (32mm)

The product information does not specify a maximum pressure rating. It is designed for typical suction and delivery duties with standard drain pumps, not high-pressure applications.

The operating temperature range is -5 to +60°C. It is not recommended for hot water above 60°C.

Flush the hose thoroughly with clean water after each use. If used with chemicals or fertilisers, a gentle rinse with water is sufficient.

The hose is suitable for light chemicals and fertilisers. It is not intended for aggressive or heavy industrial chemicals.

While not explicitly stated, standard fittings can often be adapted to join hoses. Ensure a secure, leak-proof connection if attempting to extend the length.

The product details do not specify the exact wall thickness, but it is described as 'reinforced' for durability.

Ensure the hose is not twisted. Lay it out in a straight line as much as possible. Avoid sharp bends, especially during setup.

Check that the hose clamps or fittings are securely tightened. Ensure the hose end is properly seated onto the pump's fitting.

Verify that the hose is not kinked or blocked internally. Check any strainers or filters connected to the hose for debris.

While designed for a range of temperatures, extreme cold can reduce flexibility. Allow the hose to warm up slightly before attempting to maneuver it extensively.