Kenable CAT6 Network Cable - Outdoor - 15M

This CAT6 cable supports Gigabit Ethernet speeds of up to 1000 Mbps (1 Gbps).

While the PE jacket is weatherproof and UV resistant, it is not spade-proof. For direct burial, it is highly recommended to use a protective trunking or conduit to prevent damage from digging tools.

Yes, this cable is suitable for indoor use as well. However, its primary design advantage is its durable outdoor jacket.

Snagless ends refer to the design of the connector boot that protects the cable's latch. This design prevents the latch from catching or breaking when the cable is plugged or unplugged, making installation easier and prolonging the connector's life.

Yes, this CAT6 cable is backward compatible with CAT5e and CAT5 standards and devices. However, to achieve maximum speeds, both the cable and connected devices should be CAT6-rated.

This cable uses a high-quality, full copper 24 AWG wire.

Ensure both ends are connected to Gigabit-capable ports. Check for any physical damage to the cable or connectors. Verify that the cable is not exceeding its recommended length for optimal performance. Confirm that the connected devices support Gigabit speeds.

Reseat both ends of the cable firmly into the ports. Check if the cable is damaged or kinked. Test with a known working network cable to isolate the issue. Ensure the connected devices are powered on and configured correctly.

Inspect the cable for cuts, abrasions, or kinks. If direct burial was performed without trunking, check for damage from digging tools. Replace the cable if any significant damage is found.