KNIPEX Diagonal Cutter - 125mm - MPN: 55473

These cutters are designed for soft wire up to Ø 3.0mm, medium hard wire up to Ø 2.3mm, and hard wire up to Ø 1.5mm. They are ideal for clean cuts on copper wires.

No, these cutters are optimized for precise cutting of wires within their specified capacities. They are not designed for cutting heavy gauge cables or hard materials beyond their rating.

Keep the cutting edges clean and dry. Periodically lubricate the joint with light machine oil. Avoid using them on materials harder than rated, as this can damage the induction-hardened edges.

The narrow head allows for easier access and maneuverability in confined spaces, such as electrical boxes, control panels, or tight engine compartments.

The 62 HRC (Hardness Rockwell C) rating indicates a very high level of hardness for the cutting edges, achieved through induction hardening. This ensures they remain sharp and durable for precise cutting.

While primarily designed for cutting, the precision edges can be used carefully for stripping insulation on smaller gauge wires, but dedicated wire strippers are recommended for consistent results.

Ensure you are not exceeding the recommended cutting capacities for soft, medium-hard, or hard wire. Clean the cutting edges thoroughly. If dullness persists, the induction-hardened edges may need professional sharpening or replacement of the tool.

Clean any debris from the joint area. Apply a small amount of light machine oil to the pivot point and work the handles back and forth to distribute the oil. Ensure no foreign material is lodged in the joint.

Ensure your hands are clean and dry. The molded handles with slip guards are designed for a secure grip; if excessive slippage occurs, it may indicate contamination on the handles or a need to replace the handles if they are worn.