Lick Supreme - Purple 01 - Flat Matt - 2.5L

Coverage rates can vary based on the surface texture and application method. Typically, one 2.5L can covers approximately 35 square meters. Always check the paint can for specific coverage information.

Drying times can vary depending on environmental conditions (temperature and humidity), but typically, Lick Supreme is touch-dry in 2-4 hours and fully dry within 12-24 hours. Allow sufficient drying time between coats.

Yes, Lick Supreme's moisture-resistant technology makes it suitable for use in kitchens and bathrooms.

Yes, Lick Supreme can be used on wood surfaces. Ensure the surface is properly prepared by sanding and priming as needed.

Clean brushes and rollers immediately after use with warm, soapy water. Rinse thoroughly and allow to dry before storing.

Lick Supreme offers an Ultra Flat Matt finish.

The Class 1 Scrub Rating indicates the paint's high resistance to scrubbing, allowing for easy cleaning and maintenance without damaging the paint film.

Ensure even coverage during application. Use a good quality roller or brush, and avoid applying too much paint at once. Apply in even strokes and allow each coat to dry completely before applying the next one.

Ensure the surface has been properly prepared. Apply a second coat of paint. In some cases, a primer may be required, especially if the surface is porous or the previous paint color is significantly different.

Make sure the surface is completely clean and dry before painting. Ensure proper surface preparation, including sanding and priming if necessary. The existing paint surface might not be compatible. Remove the old paint, prepare the surface, and reapply.