Pulsar Coverall - Yellow

This certification indicates the highest level of visibility for protective clothing. Class 3 garments provide the greatest conspicuity and are typically required for tasks with the highest risk, such as working on or near high-speed roads.

No, knee pads are not included. The coverall features knee pad pockets, and compatible knee pads must be purchased separately.

Machine wash at a maximum of 40°C with similar colours, do not bleach, and tumble dry on low heat. Avoid dry cleaning and excessive heat during ironing, as these can damage the fabric and coating.

The Teflon coating provides superior resistance to dirt, grease, and oil, making the coverall easier to clean and maintain its appearance. It also offers repellence against light showers.

The coverall is made from a 275gsm fabric blend. While it offers protection, it may be warm in extremely hot conditions. Proper ventilation and hydration are recommended.

'Car Safe' indicates that the garment meets specific safety standards required for personnel working in the automotive industry, particularly concerning visibility and potentially non-interference with vehicle safety systems.

The coverall is made from 80% Polyester and 20% Cotton twill, weighing 275gsm, and features a Teflon coating.

Ensure the garment is clean and that all reflective tape is free from obstruction. Confirm it meets EN ISO 20471 Class 3 requirements.

Re-evaluate cleaning methods. Avoid harsh detergents or excessive heat during washing and drying, which can degrade the coating over time. Consider professional re-treatment if available.

Ensure the fabric around the zipper is clear. Gently try to work the zipper back and forth. A small amount of wax or silicone lubricant can be applied to the zipper teeth if necessary.

Check if the stress points are being overloaded. If the tearing is due to normal wear, consider if a heavier-duty garment is required for the task. Minor tears can be professionally repaired.