Neff Recirculation Starter Kit - Black - Z861KR0
Best current price£149.00from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£149.00Visit shop NEFF Z861KR0 Recirc Kit for Venting Hob
Visit shopTravis Perkins£149.00Visit shop All Offers
2 offers from £149.00 - £219.99
View price history by clicking the chart icon.
Paul Davies Kitchens & AppliancesNeff Black Z861kr0 Recirculation Kit Flat Duct Accessory For Integrated Ventilation
Free delivery in 1–3 days
£219.99
Visit shop
Product Information
Full details
This Neff Recirculation Starter Kit is designed for users with worktops of a minimum depth of 70cm who need to install a Neff extractor hood without external ducting. Its key benefit is enabling effective air recirculation even in challenging kitchen layouts by cleverly guiding air around furniture. A potential caveat is that it requires either greater worktop depth or reduced drawer depth to accommodate the ducting components.
All features
| Colour | Black |
|---|---|
| Model Part Number | Z861KR0 |
| Brand | Neff |
Extended Product Information
FAQs
What is the minimum worktop depth required for this kit?
The Neff Recirculation Starter Kit requires a minimum worktop depth of 70cm.
Can this kit be used for fully ducted extraction?
No, this kit is specifically for partially ducted recirculated installations. It guides air around furniture rather than venting it externally.
What components are included in the kit?
The kit includes 2 x Large radius bends (Z861SB2), 3 x connectors (Z861SS1), 1 x 50cm straight channel (Z861SM1), and 1 x diffusor (Z821PD1).
Does this kit require specific furniture modifications?
Yes, it relies on a combination of ducting and furniture to disperse the air. This may require greater worktop depth or reduced depth drawers to accommodate the ducting.
What is the purpose of the fan running for 30 minutes after use?
This function helps draw air through the filters to dry them, removing excessive moisture and any lingering odors.
Can this kit be used for both island and wall installations?
Yes, it is suitable for both island installations and installations against a single wall.
What is the maximum worktop height this kit can accommodate?
The elements enable installations in worktop heights up to 960mm.
Troubleshooting
Airflow seems reduced.
Ensure all ducting connections are secure and there are no kinks or blockages in the straight channel or bends. Verify that furniture elements are not obstructing the air path. Check and clean the extractor hood's filters.
Fan not running after use.
Consult your Neff extractor hood's manual to ensure the post-use fan function is enabled and correctly configured. Check the power supply to the extractor hood.
Excessive moisture or odors persist.
Ensure the 30-minute fan run-on is active. Clean or replace the carbon filters (if applicable for your hood model in recirculation mode) and grease filters more frequently. Check that the ducting is correctly installed and not allowing moisture to accumulate.
Pros and Cons
Pros
- Enables recirculation installation where external venting is not feasible.
- All necessary components are included in one kit for simplified ordering.
- The post-use fan function helps manage moisture and odors.
- Flexible enough for island or wall installations.
- Designed to integrate with furniture for an aesthetically pleasing finish.
Cons
- Requires a minimum worktop depth of 70cm.
- May necessitate reduced drawer depth or a deeper worktop.
- Relies on furniture integration for effective air dispersal, which may not be possible in all kitchens.
- Primarily for partially ducted recirculated systems, not for fully ducted extraction.
Setup, Compatibility & Care
Setup: The Z861KR0 kit is designed for partially ducted recirculated installations. It requires careful planning to integrate the ducting components (bends, straight channel) with your kitchen furniture. Ensure that the worktop depth is at least 70cm. The elements enable installations in worktop heights up to 960mm. The system relies on a combination of the provided ducting and your kitchen furniture to disperse the air effectively.
Compatibility: This kit is specifically designed for Neff extractor hoods that support recirculated installations and worktop depths of a minimum of 70cm. Always refer to your specific Neff extractor hood's manual to confirm compatibility and any additional requirements.
Care: The components of this kit are generally maintenance-free. The primary care is for the extractor hood's filters, which should be cleaned or replaced according to the hood manufacturer's instructions. The fan's auto-run function helps maintain filter condition by drying them and removing odors.
Similar items
Neff Recirculation Kit - Black - Z861KR1From £168
Fujifilm Metal Hand Grip - X-T10/X-T20/X-T30From £89
Old Hill Ironworks Barley Twist Narrow Plate Suite Lever Euro Handles - Perry - BlackFrom £17
Staub Lid Holder - BlackFrom £53
DJI Mic Mini Phone Adapter - LightningFrom £16
Dunlop Phone Holder - BlackFrom £5
Patio Heater - Black - 1200W - FORUM LIGHTINGFrom £76
DJI RS Briefcase Handle - CP.RN.00000225.01From £49
T-Rex 3 Straps - Forest - NylonFrom £28
GoPro Adventure Kit 3.0 - GoProFrom £59
Wimberley Gimbal Head WH-200 Mk IIFrom £599
Panacea Post Support - BlackFrom £5