Shopping.co.uk

Lo-Chlor Spa Leak Sealer - 450ml

Lo-Chlor Spa Leak Sealer - 450ml

Lo-Chlor Spa Leak Sealer is a concentrated formulation designed to seal minor leaks in both the sh...

Best current price£16.80from OnBuy.com

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £16.80 - £21.95

View price history by clicking the chart icon.

OnBuy.comLo-Chlor Spa Leak Sealer - Hot Tub Plumbing Sealant
Free delivery in 1–3 days
£16.80
Visit shop
eBayLO - CHLOR SPA LEAK SEALER FOR CONCRETE & ACRYLIC HOT TUB SPAS
Free delivery in 1–3 days
£20.00
Visit shop
B&QB&Q - Spa Chemical Leak Sealer450Ml
Free delivery in 1–3 days
£21.95
Visit shop

Product Information

Full details

Lo-Chlor Spa Leak Sealer is a specialized, concentrated solution ideal for spa and hot tub owners dealing with minor leaks in the shell or internal plumbing. It offers a cost-effective, user-friendly way to seal fissures without requiring professional repairs, though it necessitates careful application procedures—including bypassing filters and manual agitation of the product—to ensure it effectively reaches and seals the leak site.

All features

BrandLo-Chlor

Extended Product Information

FAQs

Can I use the spa while the product is circulating?

No, you should not use the spa while the treatment is circulating and settling to ensure the product can reach the leak site undisturbed.

Do I have to remove my filters?

Yes, you must remove or bypass your filtration systems, as the sealer can damage filter media or become trapped inside the filter housing.

How much should I use for a 2,000-litre spa?

The recommended dosage is 225ml for every 2,000 litres of spa water.

Will this affect my water chemistry?

No, the formula is designed to be compatible with all standard spa chemical treatments.

How long does the product take to cure?

For the best possible results, the spa should be drained and left empty for 48 hours to allow the sealer to cure fully.

Troubleshooting

Leak persists after initial treatment

Ensure the product was stirred every 45 minutes and verify the water temperature is above 6 degrees Celsius before attempting a second dose.

Water appears cloudy after treatment

This is normal residue. Allow the product to settle, vacuum the bottom of the spa, and perform a thorough deep clean of your filter elements.

Pros and Cons

Pros

  • Compatible with all spa treatment chemicals
  • Easy to use without professional assistance
  • Effective for both shell and pipe leaks
  • Economical alternative to physical repairs

Cons

  • Requires manual agitation every 45 minutes during treatment
  • Cannot be used if water temperature is below 6 degrees Celsius
  • Requires bypassing or removing filtration systems during application
  • Demands a 48-hour cure time for optimal results

Setup, Compatibility & Care

Before starting, ensure your water temperature is at least 6 degrees Celsius. To apply:

  1. Remove or bypass all filtration systems to prevent the sealer from being trapped in the media.
  2. Ensure the pump is running to circulate the product.
  3. Add 225ml per 2,000 litres of water slowly into the skimmer or suction intake.
  4. Turn off all air blowers.
  5. Stir the water every 45 minutes to keep the product suspended.
  6. Circulate for at least 3 hours.
  7. Once the leak stops, allow residue to settle, vacuum it out, and thoroughly clean your filters.
  8. For a permanent cure, drain the spa and let the area remain empty for 48 hours.

Price History

DatePrice
Visit shop