Best current price£39.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£39.90Visit shop VEVOR Manual Wire Stripping Machine, 1.5mm-40mm Copper Stripper with Hand Crank or Drill Powered, Visible Stripping Depth Reference, Portable Aluminum Frame Wire Peeler for Scrap Copper Recycling
Visit shop3 offers from £39.90 - £81.04
View price history by clicking the chart icon.
The VEVOR Manual Wire Stripping Machine is designed for individuals and businesses involved in scrap copper recycling or electrical work who need an efficient tool for stripping wire insulation. Its key benefit is the ability to process a wide range of wire gauges (0.06-1.57 inches or 1.5-40 mm) quickly, either manually or with a drill. A potential caveat is that manual operation can require more physical effort for larger quantities.
| Model Part Number | BXJYSS11538MMUD21V0 |
|---|---|
| Brand | VEVOR |
The machine can handle wire diameters ranging from 0.06 inches (1.5 mm) up to 1.57 inches (40 mm).
The machine is designed for stripping insulation from electrical wires. Performance may vary slightly depending on the type and thickness of the insulation material. It is most effective on common plastic or rubber insulation.
No, a power drill is not included. The machine is designed to be operated manually with a hand crank or can be attached to a user-provided power drill.
The stripping depth is adjusted using the knobs and screws on the machine. You should set the blade so it just pierces the insulation without cutting into the copper conductor.
The frame of the machine is constructed from a durable and lightweight aluminum alloy.
Yes, it is designed for efficiency and durability, making it suitable for small to medium-scale operations like scrap copper recycling or electrical work where frequent wire stripping is required.
The blade should be kept clean and sharp. If it becomes dull or damaged, it may need to be replaced for optimal performance and to prevent damage to the wire conductor.
Adjust the blade depth using the adjustment knob and screws. Ensure the blade is sharp. Try adjusting roller tension if applicable.
Ensure the textured rollers are clean and free of debris. Check and adjust the roller gap to match the wire diameter. Ensure the wire is fed straight into the machine.
Check for any obstructions. Ensure moving parts are clean and lubricated. Verify the blade is not set too deep, causing excessive resistance.
Ensure the wire is centered properly as it enters the machine. Check for any damage or misalignment of the blade or rollers.
Setup:
Compatibility:
Care:
