Shopping.co.uk

Delphi Stabiliser Bar Link - TC2276 - Rear Left

Delphi Stabiliser Bar Link - TC2276 - Rear Left

This Delphi TC2276 Stabiliser Bar Link is a high-quality automotive component designed for the rea...

Best current price£12.05from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

13 offers from £12.05 - £24.99

View price history by clicking the chart icon.

eBayDELPHI TC2276 Rod/Strut, stabiliser for HONDA
£5.90 delivery
£12.05
Visit shop
AutodocDELPHI Anti-roll bar link HONDA TC2276 52321SWAA01
£8.45 delivery
£13.07
Visit shop
My Motor WorldDelphi Tc2276 Stabiliser Link
Free delivery in 1–3 days
£24.99
Visit shop

Product Information

Full details

The Delphi TC2276 Stabiliser Bar Link is designed for automotive technicians and DIY vehicle owners performing suspension repairs on Honda CR-V models. This component serves as a critical link in the suspension system to reduce body roll and improve handling, though it is specifically engineered for the rear-left position and requires precise thread alignment during installation.

All features

Model Part NumberTC2276
BrandDelphi

Extended Product Information

FAQs

Can I use this link on the right side of my Honda CR-V?

No, this part is specifically engineered for the rear-left fitting position.

Does this part come with the required nuts?

It is recommended to check the packaging contents; if nuts are not included, reuse your factory-specified M10 hardware if it is in good condition.

What is the OEM number for this part?

The OEM number is 52321-SWA-A01.

Is special equipment needed for installation?

You will need standard automotive hand tools, including a wrench set and potentially a hex-key to hold the stud while tightening.

How often should I replace stabilizer links?

Stabilizer links should be inspected during every oil change or whenever you hear unusual noises from the suspension; replace them when bushings show signs of cracking or play.

Troubleshooting

Persistent clunking sound after installation

Check that the mounting nuts are torqued to factory specifications and that the link is not binding.

Nut is difficult to tighten

Ensure that the M10x1.25 thread is clean and free of debris; do not force the nut if resistance is felt early.

Pros and Cons

Pros

  • Meets or exceeds OEM performance standards
  • Specific design ensures perfect fitment for rear-left suspension
  • High-quality build materials for long-term reliability
  • Standardized M10x1.25 thread sizing for easier installation

Cons

  • Compatible only with the rear-left position
  • Requires proper suspension loading during installation
  • Limited to specific Honda CR-V generations

Setup, Compatibility & Care

This part is compatible with the following vehicles:

| Vehicle Model | Compatible Generations |

| :--- | :--- |

| Honda CR-V | III (RE) |

| Honda CR-V | IV (RM_) |

Installation Tips:

  1. Ensure the vehicle is properly supported on jack stands or a lift before removing the old link.
  2. Use penetrating oil on the existing M10 nuts to prevent bolt shearing during removal.
  3. Install the new TC2276 link, ensuring that the threads are not cross-threaded during the initial tightening phase.
  4. Always torque the nuts to the manufacturer's specified values to prevent premature wear.
  5. It is recommended to replace suspension links in pairs to ensure even performance across the axle.

Price History

DatePrice
Visit shop