Eclipse Professional Tools Bolt Cutter 14" (355mm)

These bolt cutters are designed to cut hard materials up to 50 HRC.

It is recommended to lubricate the pivot point periodically, especially after heavy use or exposure to moisture, to maintain smooth operation and prevent rust.

Yes, their high tensile forged construction makes them suitable for cutting through hardened steel chains up to 50 HRC.

Solid forged handles provide superior strength, durability, and leverage compared to stamped or hollow handles, allowing for more effective cutting of tough materials.

While durable, these bolt cutters are designed for tough, professional jobs. For light household tasks, a smaller or less robust model might be more practical. However, they will perform well if needed.

Keep the blades clean and dry after each use. Apply a light oil coating and inspect for any damage before each use. Avoid cutting materials harder than 50 HRC.

Check the pivot point for dirt or debris. Clean the pivot and apply a light lubricant. Ensure the jaws are not misaligned.

Ensure the material being cut is within the specified hardness (up to 50 HRC). Inspect blades for dullness or damage; sharpen or replace if necessary. Clean any residue from the blades.

Inspect the pivot bolt. If it is loose, carefully tighten it. If the handles are damaged, the tool may need replacement.

Gently scrub the rust spots with fine-grit sandpaper or steel wool. Clean the area and apply a light protective oil coating to prevent further rusting. Ensure the tool is stored in a dry place.