Shopping.co.uk

Sealey Air Compressor with Accessory Kit - 50L, 3hp

Sealey Air Compressor with Accessory Kit - 50L, 3hp

Sealey 50L V-Twin Direct Drive Air Compressor 3hp with Air Accessory Kit. This package includes a ...

Best current price£441.00from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

11 offers from £441.00 - £575.94

View price history by clicking the chart icon.

eBay50L V-Twin Direct Drive Air Compressor 3hp with Air Accessory Kit
£10.00 delivery
£441.00
Visit shop
Power Tools DirectSealey Sac5030vekit Air Compressor 50L Direct Drive 3Hp & Air Accessory Kit
Free delivery in 1–3 days
£473.75
Visit shop
B&QB&Q - Air Compressor 50L Direct Drive 3Hp & Air Accessory Kit Sac5030Vekit
Free delivery in 1–3 days
£515.29
Visit shop
Tooled UpSealey SAC5030VE Air Compressor 50 Litre & Air Accessory Kit
£11.85 delivery
£516.95
Visit shop

Product Information

Full details

This Sealey 50L V-Twin Direct Drive Air Compressor package is ideal for home DIYers and small workshops needing a reliable air supply for various tasks. Its key benefit is the included comprehensive accessory kit, providing essential tools for immediate use. A potential consideration is its 42kg weight, requiring careful placement.

All features

Model Part NumberSAC5030VEKIT
BrandSealey

Extended Product Information

FAQs

What is the maximum pressure this compressor can deliver?

The compressor typically operates up to a maximum pressure of 8 bar (116 PSI), with the regulator allowing you to set lower working pressures for specific tools.

How often should I drain the air tank?

It is recommended to drain the condensation from the air tank after each use to prevent moisture buildup and corrosion.

Can this compressor be used for continuous spray painting?

While it can be used for light-duty spray painting, the 50L tank and 8.8 CFM output might not be sufficient for large or continuous painting jobs without interruption for the compressor to recharge.

What type of oil does the compressor use?

This is a direct drive compressor, which typically does not require oil for operation. Always refer to the specific product manual for confirmation.

How long is the air hose included?

The package includes a 10-meter long, 8mm wide hybrid air hose.

Is the tyre inflator accurate?

The PCL Airlite Eco Tyre Inflator is designed for accuracy. Always calibrate it against a known accurate gauge periodically.

What is the weight of the compressor unit itself?

The Sealey SAC5030VEKIT weighs approximately 42kg.

Troubleshooting

Compressor motor does not start

Ensure the power cord is securely plugged into a working outlet. Check the circuit breaker. Verify the unit is switched on.

Air leaks from fittings

Check that all connections are tight. Apply PTFE tape to threaded fittings if necessary. Inspect hoses and couplings for damage.

Low air pressure or output

Ensure the air tank is fully charged. Check the air filter for blockages. Verify that the air tool's CFM requirement is met by the compressor. Listen for obvious air leaks.

Compressor cycles on and off too frequently

Check for air leaks throughout the system. The tank may be too small for the continuous demand of the air tool. Ensure the regulator is set correctly.

Pros and Cons

Pros

  • All-in-one package with essential accessories included.
  • Sufficient 50L tank capacity for many common tasks.
  • 3hp motor provides good power output (8.8 CFM).
  • Direct drive design for simplicity and efficiency.
  • High-visibility hose improves workshop safety.

Cons

  • At 42kg, it is relatively heavy and may require dedicated space.
  • Direct drive compressors can sometimes be noisier than belt-driven models.
  • CFM output may be insufficient for very heavy-duty, continuous tool use.

Setup, Compatibility & Care

Setup:

  1. Unpacking: Carefully unpack all components from the packaging.
  2. Positioning: Place the compressor on a stable, level surface, ensuring adequate ventilation. Note its 42kg weight.
  3. Hose Connection: Attach the included 10m air hose to the compressor's outlet using appropriate fittings. Ensure the connection is secure.
  4. Tool Connection: Connect your chosen air tool to the other end of the air hose using the provided 1/4""BSP coupling kit.
  5. Power Up: Connect the compressor to a suitable power supply (check voltage requirements).

Compatibility:

  • The included 1/4""BSP fittings are a standard size for many pneumatic tools.
  • Always ensure your air tool's CFM requirement does not exceed the compressor's output (8.8 CFM) for optimal performance.
  • The tyre inflator uses a standard push-on connector compatible with most car and bicycle valves.

Care:

  • Drain Tank: Regularly drain condensation from the air tank after each use to prevent rust.
  • Air Filter: Inspect and clean the air filter periodically as per the manufacturer's manual.
  • Connections: Check all hose and tool connections for leaks.
  • Storage: Store the compressor in a dry, protected area when not in use.

Price History

DatePrice
Visit shop