Best current price£10.26from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£10.26Visit shop Myson Matchmate 10Mm Lockshield Angle Chrome Pushfit
Visit shop
B&Q£13.34Visit shop B&Q - Matchmate 10mm Lockshield Angle Chrome Pushfit
Visit shop2 offers from £10.26 - £13.34
View price history by clicking the chart icon.
The Myson Matchmate TRV valve is designed for homeowners looking to efficiently control individual radiator temperatures for improved comfort and energy savings. Its key benefit is providing reliable temperature regulation with frost protection, though its 10mm connection size may limit compatibility with some older pipe systems. This lockshield valve features an angled design for easier installation and allows precise adjustment of radiator heat output.
| Colour | Silver |
|---|---|
| Brand | Myson |
TRV stands for Thermostatic Radiator Valve, which is a device designed to regulate the temperature of a radiator.
You can set the desired temperature by turning the thermostat dial on the valve head. Typically, numbers on the dial correspond to approximate room temperatures, with higher numbers indicating a warmer setting.
This valve is designed for use with standard hot water-based central heating systems. Compatibility depends on the radiator valve's connection size (10mm in this case).
The angled design of the valve body helps to orient the pipework and the valve head in a more convenient direction, often facilitating easier installation and a neater appearance, particularly in confined spaces.
The frost protection setting, usually indicated by a snowflake symbol or a low number (e.g., '1'), keeps the radiator at a low temperature just above freezing to prevent water inside from freezing and causing damage during cold weather when the heating is off.
Basic DIY skills and plumbing knowledge are usually sufficient for installation. However, if you are unsure, it is recommended to hire a qualified professional to ensure correct and safe installation.
Please refer to the product packaging or manufacturer's documentation for specific warranty information, as it can vary.
Ensure the main valve head is not set to the lowest setting or frost protection. Check that the lockshield valve is fully open. Verify there are no airlocks in the system by bleeding the radiator.
Adjust the thermostat dial on the valve head to the desired temperature setting. Allow time for the room temperature to stabilize after adjustment.
Turn off the heating system and isolate the radiator. Gently tighten the connection nut. If the leak persists, the valve may need professional servicing or replacement.
Cycle the thermostat head through its full range of motion. If it remains stiff, the internal mechanism may be affected by debris or scale; gentle cycling or professional cleaning might be necessary.
Setup:
Compatibility:
This valve is designed with a 10mm connection. It is compatible with radiator valves that have a corresponding 10mm inlet. Please verify your existing radiator valve connection size before purchasing.
Care:
